Hi,
Just a few notes here about the installation of Knoppix 7.2.0 on an old EEEPC 701 (512 Mo RAM, 4 Go SSD, 800x480 screen).
Works OK, wifi OK. But installation to hard disk (SSD in fact) was painful because of the restrictions and lack of configurability of KNOPPIX "0wn" script. For successful use of the "0wn" script I did the following:
* Modify /usr/share/0wn/0wn-partitioning so that fonction get_disks() only returns "/dev/sda" (the result normally includes /dev/sdc, which causes a bug on my machine because /dev/sdc is not available)
* Reduce swap size in function partition_whole_disk() in script /usr/share/0wn/0wn-partitioning
* Reduce SWAP_NEEDED value accordingly in script /usr/share/0wn/0wn-common
After this, the "0wn" script could run flawlessly and installation finished correctly. Last configuration was to set "xmodule=fbdev" in the boot command line, in order to get the 800x480 screen resolution working.
O.
Apple IIe Vintage Computer A2S2064 w/IO Controller & Printer Connector Board
$199.99
Vintage Apple Macintosh SE M5010 Computer w/ Keyboard & mouse -power up- no OS
$189.99
Vintage Apple IIe Computer A2S2128 (825-1351-A)
$174.99
Vintage Apple Power Macintosh 5400/180 M3046 Computer -As Is for Parts or Repair
$150.00
Vintage Classic Apple Macintosh System Boot Install Disk Floppy/CD *Pick Version
$10.39
Vintage Apple 655-0101-D I/O 5.25" Disk Drive Controller Card w/Ribbon Cable QTY
$29.99
Apple IIe A2S2064 Vintage Personal Computer Working
$249.99
Vintage Sanyo VM 4209 Computer Monitor Preferred For Apple 1978
$399.00
Vintage Apple Macintosh 512K / Mouse, Keyboard & Extras + Carry Case / Turns On
$260.00
Vintage Apple Macintosh SE M5011 1MB All In One Computer PowerTested*Repair/Part
$60.00