Hi,
Just a few notes here about the installation of Knoppix 7.2.0 on an old EEEPC 701 (512 Mo RAM, 4 Go SSD, 800x480 screen).
Works OK, wifi OK. But installation to hard disk (SSD in fact) was painful because of the restrictions and lack of configurability of KNOPPIX "0wn" script. For successful use of the "0wn" script I did the following:
* Modify /usr/share/0wn/0wn-partitioning so that fonction get_disks() only returns "/dev/sda" (the result normally includes /dev/sdc, which causes a bug on my machine because /dev/sdc is not available)
* Reduce swap size in function partition_whole_disk() in script /usr/share/0wn/0wn-partitioning
* Reduce SWAP_NEEDED value accordingly in script /usr/share/0wn/0wn-common
After this, the "0wn" script could run flawlessly and installation finished correctly. Last configuration was to set "xmodule=fbdev" in the boot command line, in order to get the 800x480 screen resolution working.
O.
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$454.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
DELL PowerEdge R730 16SFF Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$317.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$39.99
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$433.00
Dell Poweredge R730xd 2x E5-2660 v3 2.6ghz / 64gb / H730 / 24x Trays / 2x 750w
$344.99