-
Senior Member
registered user
Keeping up with the times
.
I notice some peculiar things about tz=localtime in my situation,
where I keep my hardware clock set to local time, and I prefer to see
this local time on any desktop I might be using. The Windows 7 desktop
has no problem with this arrangement, of course. But on this same machine...
My Knoppix 7.0.5 LiveUSB has tz=localtime on the APPEND line of syslinux.cfg;
My Knoppix 7.2 LiveCD has tz=localtime on neither the DEFAULT line nor the APPEND line; and
My Knoppix 7.2 LiveCD-size LiveUSB requires tz=localtime on the DEFAULT line.
-
Hi, @utu.
I am using K 7.2 right now.
I've got the local date and time on the clock by adding tz=localtime in
/mnt-system/boot/syslinux/syslinux.cfg in the line APPEND of the section knoppix:
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
-
Senior Member
registered user
Greeting, Porteno.
I don't know why adding tz=localtime to the APPEND line wouldn't work for me
as it did in 7.0.5. I use a CD-size LiveUSB if that makes any difference.
It should be noted that, should I want to use the command 'date', It assumes
the value it is reporting is in UTC unless its given more FORMAT information.
-
I installed Knoppix 7.2 DVD on a flashdrive. I also had trouble with the time. I read through the information posted by others.
I editted this file on my flash drive ... k:\boot\syslinux\syslinux.cfg
In my original syslinux.cfg file , the following records appear at lines 17,18 and 19.
LABEL knoppix
KERNEL linux
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I added "tz=localtime" at the end of record 19 , which starts with APPEND.
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
then saved the file.
I then restarted the computer , booting from the flashdrive .
The correct time is now displayed .
-
With "cat /proc/driver/rtc; date" you can see the time of the BIOS clock and in the last line the time of your panel clock. I allways recomend to use UTC time within the BIOS and "tz=..." in the kernel line with your local parameters - for me "tz=Europe/Berlin".
Code:
$ cat /proc/driver/rtc; date
rtc_time : 17:09:13
rtc_date : 2013-09-11
alrm_time : 00:00:00
alrm_date : 2013-09-12
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay
Mi 11. Sep 19:09:12 CEST 2013
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX picture](/store/img/1RkAAOSwPABmkW20/s-l225//Cisco-Nexus-9300-48-Port-25GbE-SFP-6x100GbE-QSFP-S.jpg)
Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX
$499.99
![Cisco WS-C3850-12X48U-L 48 Port 10/100/1000 Modular Uplink Switch-Same Day Shipp picture](/store/img/lBwAAOSwI~9lEfW-/s-l225//Cisco-WS-C3850-12X48U-L-48-Port-10-100-1000-Modula.jpg)
Cisco WS-C3850-12X48U-L 48 Port 10/100/1000 Modular Uplink Switch-Same Day Shipp
$198.99
![Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture](/store/img/d3AAAOSw35dlrsCo/s-l225//Cisco-Nexus-N9K-C92160YC-X-48P-25GbE-SFP28-6P-QSFP.jpg)
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$475.00
![Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU picture](/store/img/jzAAAOSwRq9k-jYg/s-l225//Cisco-Nexus-N9K-C9372TX-48P-10G-Gigabit-Ethernet-6.jpg)
Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU
$199.99
![C3850-NM-2-10G CISCO 2 x 10GE Network Module 73-12734-06 picture](/store/img/htEAAOSwt1RmnaGX/s-l225//C3850-NM-2-10G-CISCO-2-x-10GE-Network-Module-73-12.jpg)
C3850-NM-2-10G CISCO 2 x 10GE Network Module 73-12734-06
$24.99
![New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping* picture](/store/img/m7EAAOSwMSNlzEVH/s-l225//New-Sealed-Cisco-GLC-SX-MMD-1000BASE-SX-Transceive.jpg)
New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping*
$11.00
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/yEAAAOSwxVReIhma/s-l225//Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture](/store/img/Tb4AAOSwmeVlqJuU/s-l225//NEW-Sealed-Cisco-SFP-10G-LR-10GBASE-LR-SFP-1310nm-.jpg)
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
![Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC picture](/store/img/dXYAAOSwqEBinnAI/s-l225//Cisco-WS-C3750X-48PF-S-48-Port-PoE-Gigabit-Switch-.jpg)
Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC
$114.88
![Cisco CP-8861-K9 IP Business Phone - 7 Phones All Together - Desktop picture](/store/img/KNUAAOSwpP5mnsl7/s-l225//Cisco-CP-8861-K9-IP-Business-Phone-7-Phones-All-To.jpg)
Cisco CP-8861-K9 IP Business Phone - 7 Phones All Together - Desktop
$380.00