-
Senior Member
registered user
Keeping up with the times
.
I notice some peculiar things about tz=localtime in my situation,
where I keep my hardware clock set to local time, and I prefer to see
this local time on any desktop I might be using. The Windows 7 desktop
has no problem with this arrangement, of course. But on this same machine...
My Knoppix 7.0.5 LiveUSB has tz=localtime on the APPEND line of syslinux.cfg;
My Knoppix 7.2 LiveCD has tz=localtime on neither the DEFAULT line nor the APPEND line; and
My Knoppix 7.2 LiveCD-size LiveUSB requires tz=localtime on the DEFAULT line.
-
Hi, @utu.
I am using K 7.2 right now.
I've got the local date and time on the clock by adding tz=localtime in
/mnt-system/boot/syslinux/syslinux.cfg in the line APPEND of the section knoppix:
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
-
Senior Member
registered user
Greeting, Porteno.
I don't know why adding tz=localtime to the APPEND line wouldn't work for me
as it did in 7.0.5. I use a CD-size LiveUSB if that makes any difference.
It should be noted that, should I want to use the command 'date', It assumes
the value it is reporting is in UTC unless its given more FORMAT information.
-
I installed Knoppix 7.2 DVD on a flashdrive. I also had trouble with the time. I read through the information posted by others.
I editted this file on my flash drive ... k:\boot\syslinux\syslinux.cfg
In my original syslinux.cfg file , the following records appear at lines 17,18 and 19.
LABEL knoppix
KERNEL linux
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I added "tz=localtime" at the end of record 19 , which starts with APPEND.
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
then saved the file.
I then restarted the computer , booting from the flashdrive .
The correct time is now displayed .
-
With "cat /proc/driver/rtc; date" you can see the time of the BIOS clock and in the last line the time of your panel clock. I allways recomend to use UTC time within the BIOS and "tz=..." in the kernel line with your local parameters - for me "tz=Europe/Berlin".
Code:
$ cat /proc/driver/rtc; date
rtc_time : 17:09:13
rtc_date : 2013-09-11
alrm_time : 00:00:00
alrm_date : 2013-09-12
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay
Mi 11. Sep 19:09:12 CEST 2013
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell SNPTP9W1C/16G 16 GB 2666MHz (PC4-2666) Memory Ram
$34.95
Crucial 8GB 1x8GB PC RAM PC3L 12800U DDR3 1600MHz Desktop Memory DIMM
$8.36
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
NEW OLOy 16GB 2x8GB KIT DDR4-3000 PC4-24000 Desktop Gaming RAM MD4U0830160BB1ST
$19.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Micron 16GB DDR4-2400 SODIMM MTA16ATF2G64HZ-2G3E1 Laptop Memory RAM
$21.99
RAMAXEL 16 GB ( 4 GB x 4 sticks ) DDR3L-1600 PC3L-12800U 12800 Desktop RAM - HVD
$11.42
128GB Kit 4x 32GB PC4-17000 LRDIMM DELL POWEREDGE R730xd R730 R630 Memory RAM
$127.96
HYNIX HMT31GR7BFR4C-H9 8GB PC3-10600R DDR3-1333MHZ 2Rx4 (LOT OF 8) DRAT-3
$999.00