-
Senior Member
registered user
Keeping up with the times
.
I notice some peculiar things about tz=localtime in my situation,
where I keep my hardware clock set to local time, and I prefer to see
this local time on any desktop I might be using. The Windows 7 desktop
has no problem with this arrangement, of course. But on this same machine...
My Knoppix 7.0.5 LiveUSB has tz=localtime on the APPEND line of syslinux.cfg;
My Knoppix 7.2 LiveCD has tz=localtime on neither the DEFAULT line nor the APPEND line; and
My Knoppix 7.2 LiveCD-size LiveUSB requires tz=localtime on the DEFAULT line.
-
Hi, @utu.
I am using K 7.2 right now.
I've got the local date and time on the clock by adding tz=localtime in
/mnt-system/boot/syslinux/syslinux.cfg in the line APPEND of the section knoppix:
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
-
Senior Member
registered user
Greeting, Porteno.
I don't know why adding tz=localtime to the APPEND line wouldn't work for me
as it did in 7.0.5. I use a CD-size LiveUSB if that makes any difference.
It should be noted that, should I want to use the command 'date', It assumes
the value it is reporting is in UTC unless its given more FORMAT information.
-
I installed Knoppix 7.2 DVD on a flashdrive. I also had trouble with the time. I read through the information posted by others.
I editted this file on my flash drive ... k:\boot\syslinux\syslinux.cfg
In my original syslinux.cfg file , the following records appear at lines 17,18 and 19.
LABEL knoppix
KERNEL linux
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I added "tz=localtime" at the end of record 19 , which starts with APPEND.
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
then saved the file.
I then restarted the computer , booting from the flashdrive .
The correct time is now displayed .
-
With "cat /proc/driver/rtc; date" you can see the time of the BIOS clock and in the last line the time of your panel clock. I allways recomend to use UTC time within the BIOS and "tz=..." in the kernel line with your local parameters - for me "tz=Europe/Berlin".
Code:
$ cat /proc/driver/rtc; date
rtc_time : 17:09:13
rtc_date : 2013-09-11
alrm_time : 00:00:00
alrm_date : 2013-09-12
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay
Mi 11. Sep 19:09:12 CEST 2013
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HyperX FURY DDR4 64GB (4x16GB) 3200MHz PC4-25600 Desktop RAM Memory DIMM 288PIN
$129.95
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) XMP
$38.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Kingston Fury HP32D4U8D8HC-16X 16GB 2Rx8 XMP4-3200-UB1-11 RAM Desktop Memory
$22.00
CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800)
$79.95
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Lot of 50 Samsung/SK Hynix/Kingston (8GB) DDR4 1Rx8 PC4-3200AA Laptop RAM Memory
$599.98
Patriot Viper Steel DDR4 RAM 16GB (2X8GB) pvs416g440c9k
$69.99