-
Senior Member
registered user
Keeping up with the times
.
I notice some peculiar things about tz=localtime in my situation,
where I keep my hardware clock set to local time, and I prefer to see
this local time on any desktop I might be using. The Windows 7 desktop
has no problem with this arrangement, of course. But on this same machine...
My Knoppix 7.0.5 LiveUSB has tz=localtime on the APPEND line of syslinux.cfg;
My Knoppix 7.2 LiveCD has tz=localtime on neither the DEFAULT line nor the APPEND line; and
My Knoppix 7.2 LiveCD-size LiveUSB requires tz=localtime on the DEFAULT line.
-
Hi, @utu.
I am using K 7.2 right now.
I've got the local date and time on the clock by adding tz=localtime in
/mnt-system/boot/syslinux/syslinux.cfg in the line APPEND of the section knoppix:
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
-
Senior Member
registered user
Greeting, Porteno.
I don't know why adding tz=localtime to the APPEND line wouldn't work for me
as it did in 7.0.5. I use a CD-size LiveUSB if that makes any difference.
It should be noted that, should I want to use the command 'date', It assumes
the value it is reporting is in UTC unless its given more FORMAT information.
-
I installed Knoppix 7.2 DVD on a flashdrive. I also had trouble with the time. I read through the information posted by others.
I editted this file on my flash drive ... k:\boot\syslinux\syslinux.cfg
In my original syslinux.cfg file , the following records appear at lines 17,18 and 19.
LABEL knoppix
KERNEL linux
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I added "tz=localtime" at the end of record 19 , which starts with APPEND.
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
then saved the file.
I then restarted the computer , booting from the flashdrive .
The correct time is now displayed .
-
With "cat /proc/driver/rtc; date" you can see the time of the BIOS clock and in the last line the time of your panel clock. I allways recomend to use UTC time within the BIOS and "tz=..." in the kernel line with your local parameters - for me "tz=Europe/Berlin".
Code:
$ cat /proc/driver/rtc; date
rtc_time : 17:09:13
rtc_date : 2013-09-11
alrm_time : 00:00:00
alrm_date : 2013-09-12
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay
Mi 11. Sep 19:09:12 CEST 2013
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Polycom VVX 411 IP VOIP POE Gigabit Telephone [L/N] BUSINESS OFFICE RECEPTION
$24.00
Grandstream DP720 10 SIP Accounts Full HD Audio Dect Cordless VoIP Telephone
$24.44
Grandstream GXP1620 Small to Medium Business HD IP Phone VoIP Phone and Device
$21.68
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
Cisco/Linksys SPA2102 VoIP Phone Adapter Router 2FXS (Unlocked)
$16.99
Cisco CP-8845-K9 5 Line IP Video Phone - Charcoal
$25.00
Cisco CP-7965G IP VOIP POE Gigabit Telephone [L/N] BUSINESS OFFICE RECEPTION
$20.00
Polycom VVX 250 Business IP Phone with 2.8 in. Color Display & Ethernet, Black
$32.89
Cisco CP-8851 Business VoIP UC IP Phone *NEW*
$179.99