Results 1 to 8 of 8

Thread: Re-arranging cloop files

  1. #1
    Junior Member
    Join Date
    Jun 2011
    Posts
    23

    Re-arranging cloop files

    Did a usb install of v7.2 on 8Gb pendrive, and now,
    I wanted to add a cloop file before the current KNOPPIX file by renaming it to KNOPPIX2.
    Will this be ok, because seems that most of the time booting stops at point "starting syslog" msg ?

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by vkrishn View Post
    I wanted to add a cloop file before the current KNOPPIX file by renaming it to KNOPPIX2.
    Greetings, vkrishn

    I'm guessing you have a DVD-size LiveUSB and that you find
    that in your /mnt-system/KNOPPIX/ folder you find files
    KNOPPIX and KNOPPIX1. Unless you are re-arranging how
    KNOPPIX itself works, I think your next overlay should
    be KNOPPIX2. Knoppix will look for the KNOPPIX file to set
    itself up, and will add features by bringing in the KNOPPIX1
    overlay, then look for KNOPPIX2, KNOPPIX3 on up to KNOPPIX7.
    I think it (currently) runs out of cloop device assignments there.

    Without knowing in more detail what you expect to accomplish
    I think bringing in some new overlay " ahead-of " the basic
    KNOPPIX file may give surprising and likely undesirable results.

    Studying the file 'init' you may see how KNOPPIX handles
    overlays. There are a lot of options there already.
    Last edited by utu; 08-17-2013 at 11:16 PM.

  3. #3
    Junior Member
    Join Date
    Jun 2011
    Posts
    23
    Greetings, utu

    I was wanting to rename the present KNOPPIX to next num,
    I guess that would be KNOPPIX2 and then drop a KNOPPIX(new) file,
    so now KNOPPIX2(Orig KNOPPIX ~ 3.9Gb) is overlayed after newer KNOPPIX.

    Note that overlaying works properly,
    but most of the time the booting stops at "starting syslog" msg.
    If I press ctr+c, booting continues,
    but then this is not ok as some important services may not get started.

    I hope I am making sense.

  4. #4
    Junior Member
    Join Date
    Jun 2011
    Posts
    23
    Studying the file 'init' you may see how KNOPPIX handles
    overlays. There are a lot of options there already.
    Ah, yes.
    Checked runknoppixlib() and runknoppixchroot(), seems orig KNOPPIX is needed.
    Option would be to figure out the minimum files needed for init to run before switchroot.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings again, vkrishn

    It's not clear to me what your needs might be, but there are two
    additional means of modification built into Knoppix, other than
    additional cloop overlays. Somewhat 'hidden' in the Knoppix-cheatcodes
    text are the following ideas. Perhaps one of these might be of some
    use to you.
    Excerpts from knoppix-cheatcodes.txt

    If you place an update*.zip or update*tar.gz file on the medium holding
    the KNOPPIX data, it will be unpacked onto the overlayed filesystem
    before starting "init", thus allowing quick reconfiguration of the
    system.

    The file "knoppix.sh", if residing in the main KNOPPIX directory, will
    be execuded after autoconfiguration and before starting the graphical
    desktop. It can be used in order to start additional services.

  6. #6
    Junior Member
    Join Date
    Jun 2011
    Posts
    23
    Normally additional cloop files are numbered after base KNOPPIX(3.9gb) file.
    This is when the newer cloop file KNOPPIX2 contain only new applications.
    General process is to cloop`pify the persistent file content (this process is well known)

    What I am trying:
    1. Install minimalistic debian(cli only).
    2. Add all your application needed, for me, its most likely the ones not in knoppix.
    3. upgrade to same kernel as knoppix.
    4. Cloop`pify the whole system.
    5. Drop is as KNOPPIX, before renaming KNOPPIX->KNOPPIX2

    Cons:
    Lots of extra/duplicate files get in cloop.
    Pros:
    I can create a small standalone specialized installs like rescue/diagnostic,
    then drop it in current knoppix or use separately.

    Well. tried the above and it works, though some minor tweaking needs to done before.

    What I was thinking was if knoppix had option like:
    knoppix_list=KNOPPIX,KNOPPIX3
    This would allow to switch my system or mix match application during booting.

    Another neat thing would be to have a base KNOPPIX(150mb cloop), and other cloops just application.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Interesting approach; I do similar but different things to achieve much the same end.

    1. I use 32-bit Knoppix CD to define a minimal Knoppix LiveUSB with reiserfs persistence.
    2. I add programs I like that aren't in the initial LiveUSB such as M$-ttf-corefonts,
    flashplugin-nonfree, geany & chromium, and a few special files of my own and then
    convert all this additional stuff into a KNOPPIX1 overlay.
    3. Then I renew the persistence file by reformatting with gparted.

    Among the special files in item 2 is a small file which automates part of the new-overlay
    process.

    My 2Gb SanDisk LiveUSB has a 1.14 GB Fat32 partition with 356 Mb currently free and
    a 718 Mb reiser partition with 603 Mb currently free. Much of the 'new' reiser material is
    'new' cache information which I ignore in making overlays.

    If-and-when I develop any significant new stuff in persistence, I will make a second overlay,
    then a third, etc. But so far, I expect I may not need any new overlays if Klaus K makes
    his own upgrade sometime later this year.

    I see very little necessity in re-mastering, so long as most of my changes are additive and
    not overlapping previous overlay material in some way.

    It is also true that the CD-size Knoppix almost fulfills my needs. The DVD-size Knoppix
    has many programs I'd never use.

    In your scheme, I think so long as you carefully choose which overlays go in
    /mnt-system/KNOPPIX/, you may pick and choose just which ones will be overlaid.
    You can hide any others in /mnt-system/ (or someplace else) and they'll not be acted upon.

  8. #8
    Junior Member
    Join Date
    Jun 2012
    Posts
    19
    I also would like Knoppix to be modular, like the slackware derivative porteus (http://www.porteus.org/). I would use porteus, but they have split their 32- and 64- bit kernels and so you have to have complete separate filesystems for the two versions, unlike the dvd version of Knoppix in which they co-exist nicely in the same filesystem.
    What I really want (and am working on, slowly) is a modular Knoppix (Debian, good hardware-detection with great filesystem) with modular software (preinstalled, injected into filesystem)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


2TB 512GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA picture

2TB 512GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA

$15.99



SanDisk Cruzer Glide USB 3.0 16GB 32GB 64GB 128GB 256GB Flash Drive Memory Lot picture

SanDisk Cruzer Glide USB 3.0 16GB 32GB 64GB 128GB 256GB Flash Drive Memory Lot

$276.48



USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT picture

USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT

$244.01



SanDisk 8GB 16GB 32GB 64GB 128GB USB Flash Drive Thumb Memory Stick Pen Lot Pack picture

SanDisk 8GB 16GB 32GB 64GB 128GB USB Flash Drive Thumb Memory Stick Pen Lot Pack

$149.95



ZIPPY USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB LOT picture

ZIPPY USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB LOT

$4.49



Sandisk 16GB 32GB 64GB 128GB Cruzer Blade Flash Drive Memory Stick USB Lot Pack picture

Sandisk 16GB 32GB 64GB 128GB Cruzer Blade Flash Drive Memory Stick USB Lot Pack

$79.90



2TB 512GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA picture

2TB 512GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA

$9.99



2TB 256GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA picture

2TB 256GB USB Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage USA

$15.99



1GB-128GB USB Flash Drives Thumb Memory Storage Stick U Disk Lot 1 2 5 10 20 100 picture

1GB-128GB USB Flash Drives Thumb Memory Storage Stick U Disk Lot 1 2 5 10 20 100

$307.71



Lot SanDisk USB Flash Drive Cruzer Blade Glade Force Ultra Flair Luxe 3.0 3.1 picture

Lot SanDisk USB Flash Drive Cruzer Blade Glade Force Ultra Flair Luxe 3.0 3.1

$164.99