Results 1 to 6 of 6

Thread: 7.2.0 usb persistent image question

  1. #1
    Member registered user
    Join Date
    Nov 2006
    Posts
    30

    7.2.0 usb persistent image question

    I recently bought 7.2.0 dvd on a usb drive from a retailer listed in the Order Knoppix section of the site. The problem is unlike previous versions I have had, the option to create a persistent image is not displayed during boot. I found that my session was automatically saved on the usb after I shut down, which I do not want. Usually I choose not to have persistence or encryption.

    Is this some kind of flaw or has something changed?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Perhaps the retailer has already created a persistent memory for you. Have a look at
    http://knoppix.net/wiki/Category:Har...e_Installation
    to learn more about the two different methods of persitent memory within Knoppix. If you don't like it, delete the file knoppix-data.img respectively the file knoppix-data.inf (and the content of the overlay partition).

  3. #3
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    In the link it says:Flash disk InstallBoot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk' (since Knoppix 7.1, respectively "experimental version" in Knoppix 7.05). There are two options to choose from:Installation on FAT32 with (optional) overlay file < 4GBInstallation on FAT32 with additional overlay partitionIn the first case you will get an installation of compressed filesysten Image and the persistent memory all within '/dev/sda1' (FAT32 formatted).In the other case you will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the persistent memory in '/dev/sda2' (ReiserFS formatted).What do I do if I don't want either type of persistent memory? ie: no persistent memory? Choose Cancel?Thanks.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you cancel the installation of persistent memory within 7.2.0, the installation is broken and you cannot use it. With earlier versions of Knoppix you have had the ability to pass over this step and always use the cheatcode "knoppix noimage".

  5. #5
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    So it is necessary to always create some persistent memory?And I can not use the noimage cheatcode?The vendor I bought my usb from said I could also edit the ' /boot/syslinux/syslinux.cfg' file with 'noimage' to make it permanent. No?Thanks again.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Yes, of course, you can use "noimage" too.
    http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering

    And after this you can delete the file '/mnt-system/KNOPPIX/knoppix-data.img(or .aes) or, in case of partition overlay, the content of the overlay within the second partition.

    I hope, KK will correct the little error within his script in the next version of Knoppix.
    Last edited by Werner P. Schulz; 10-05-2013 at 11:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Windows Server Standard 2022 64BIT English 1PK DSP OEI DVD 16 Core picture

Windows Server Standard 2022 64BIT English 1PK DSP OEI DVD 16 Core

$39.99



Dell PowerEdge R720 Server 2x E5-2650 V2 = 16 Cores | 128GB | H710 | 4x trays picture

Dell PowerEdge R720 Server 2x E5-2650 V2 = 16 Cores | 128GB | H710 | 4x trays

$248.99



Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS

$314.99



HP Proliant DL360p G8 Server 2x 2670 2.6GHz = 16 Cores | 64GB | 2x 300GB SAS picture

HP Proliant DL360p G8 Server 2x 2670 2.6GHz = 16 Cores | 64GB | 2x 300GB SAS

$201.60



HP Proliant MicroServer G8 Xeon E3-1220L V2 2.3GHZ/8GB NO HARD DRIVE W 4 HP TRAY picture

HP Proliant MicroServer G8 Xeon E3-1220L V2 2.3GHZ/8GB NO HARD DRIVE W 4 HP TRAY

$209.00



HYVE ZEUS V1 1U SERVER 2x XEON TEN CORE E5-2660V2 2.2GHz 64GB RAM NO HDD picture

HYVE ZEUS V1 1U SERVER 2x XEON TEN CORE E5-2660V2 2.2GHz 64GB RAM NO HDD

$156.00



1U Supermicro server  2x Intel E5-2667 v2 16 core Turbo 4.0Ghz 2x 10G SFP+ 128GB picture

1U Supermicro server 2x Intel E5-2667 v2 16 core Turbo 4.0Ghz 2x 10G SFP+ 128GB

$259.00



Dell Poweredge R720xd 2U 14-Bay LFF 3.5

Dell Poweredge R720xd 2U 14-Bay LFF 3.5" Configure To Order H710 2x 750w PSU

$347.99



Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 128GB | H710 | 2x 1.2TB SAS picture

Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 128GB | H710 | 2x 1.2TB SAS

$333.99



HP Proliant BL460c G8 Blade Server Two XEON E5-2670 2X 8 Core 2.6GHz 128GB RAM picture

HP Proliant BL460c G8 Blade Server Two XEON E5-2670 2X 8 Core 2.6GHz 128GB RAM

$120.00