-
7.2.0 usb persistent image question
I recently bought 7.2.0 dvd on a usb drive from a retailer listed in the Order Knoppix section of the site. The problem is unlike previous versions I have had, the option to create a persistent image is not displayed during boot. I found that my session was automatically saved on the usb after I shut down, which I do not want. Usually I choose not to have persistence or encryption.
Is this some kind of flaw or has something changed?
-
Perhaps the retailer has already created a persistent memory for you. Have a look at
http://knoppix.net/wiki/Category:Har...e_Installation
to learn more about the two different methods of persitent memory within Knoppix. If you don't like it, delete the file knoppix-data.img respectively the file knoppix-data.inf (and the content of the overlay partition).
-
In the link it says:Flash disk InstallBoot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk' (since Knoppix 7.1, respectively "experimental version" in Knoppix 7.05). There are two options to choose from:Installation on FAT32 with (optional) overlay file < 4GBInstallation on FAT32 with additional overlay partitionIn the first case you will get an installation of compressed filesysten Image and the persistent memory all within '/dev/sda1' (FAT32 formatted).In the other case you will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the persistent memory in '/dev/sda2' (ReiserFS formatted).What do I do if I don't want either type of persistent memory? ie: no persistent memory? Choose Cancel?Thanks.
-
If you cancel the installation of persistent memory within 7.2.0, the installation is broken and you cannot use it. With earlier versions of Knoppix you have had the ability to pass over this step and always use the cheatcode "knoppix noimage".
-
So it is necessary to always create some persistent memory?And I can not use the noimage cheatcode?The vendor I bought my usb from said I could also edit the ' /boot/syslinux/syslinux.cfg' file with 'noimage' to make it permanent. No?Thanks again.
-
Yes, of course, you can use "noimage" too.
http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering
And after this you can delete the file '/mnt-system/KNOPPIX/knoppix-data.img(or .aes) or, in case of partition overlay, the content of the overlay within the second partition.
I hope, KK will correct the little error within his script in the next version of Knoppix.
Last edited by Werner P. Schulz; 10-05-2013 at 11:39 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$38.50

Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device
$29.69

Cisco CP-8841 Unified VoIP IP Business Office Phone Color Display CP-8841-K9
$24.99

Cisco SPA122 2-port Telephone Adapter ATA With Router USED UNLOCKED
$29.99

Cisco CP-7821 VOIP Phone | With Stand and Handset | Business IP Phone 7821
$14.99

HT701 Grandstream Telephone Adapter VoIP Phone With PSU Voice Over IP
$5.25

Cisco CP-8841 Unified VoIP IP Business Office Phone Color Display CP-8841-K9
$24.99

Cisco CP-8861-K9 5-Line VoIP Business Phone w/ Stand & Handset
$27.98

Yealink T57W IP Phone, 16 VoIP Accounts. 7-Inch Touch Screen w/o Power Adapter
$139.95

Cisco CP-8851 Unified VoIP IP Business Office Phone Color Display CP-8851-K9
$29.99