Results 1 to 6 of 6

Thread: 7.2.0 usb persistent image question

  1. #1
    Member registered user
    Join Date
    Nov 2006
    Posts
    30

    7.2.0 usb persistent image question

    I recently bought 7.2.0 dvd on a usb drive from a retailer listed in the Order Knoppix section of the site. The problem is unlike previous versions I have had, the option to create a persistent image is not displayed during boot. I found that my session was automatically saved on the usb after I shut down, which I do not want. Usually I choose not to have persistence or encryption.

    Is this some kind of flaw or has something changed?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Perhaps the retailer has already created a persistent memory for you. Have a look at
    http://knoppix.net/wiki/Category:Har...e_Installation
    to learn more about the two different methods of persitent memory within Knoppix. If you don't like it, delete the file knoppix-data.img respectively the file knoppix-data.inf (and the content of the overlay partition).

  3. #3
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    In the link it says:Flash disk InstallBoot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk' (since Knoppix 7.1, respectively "experimental version" in Knoppix 7.05). There are two options to choose from:Installation on FAT32 with (optional) overlay file < 4GBInstallation on FAT32 with additional overlay partitionIn the first case you will get an installation of compressed filesysten Image and the persistent memory all within '/dev/sda1' (FAT32 formatted).In the other case you will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the persistent memory in '/dev/sda2' (ReiserFS formatted).What do I do if I don't want either type of persistent memory? ie: no persistent memory? Choose Cancel?Thanks.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you cancel the installation of persistent memory within 7.2.0, the installation is broken and you cannot use it. With earlier versions of Knoppix you have had the ability to pass over this step and always use the cheatcode "knoppix noimage".

  5. #5
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    So it is necessary to always create some persistent memory?And I can not use the noimage cheatcode?The vendor I bought my usb from said I could also edit the ' /boot/syslinux/syslinux.cfg' file with 'noimage' to make it permanent. No?Thanks again.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Yes, of course, you can use "noimage" too.
    http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering

    And after this you can delete the file '/mnt-system/KNOPPIX/knoppix-data.img(or .aes) or, in case of partition overlay, the content of the overlay within the second partition.

    I hope, KK will correct the little error within his script in the next version of Knoppix.
    Last edited by Werner P. Schulz; 10-05-2013 at 11:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB

$2699.99



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB

$3299.99



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99



2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD picture

2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD

$30.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



HP BL460c 2SFF GEN9 Blade Server 2x 12 Core Xeon E5-2670 v3 256GB RAM 600GB HDD picture

HP BL460c 2SFF GEN9 Blade Server 2x 12 Core Xeon E5-2670 v3 256GB RAM 600GB HDD

$199.99



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99



Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores  256gb  2x 146gb 15k picture

Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k

$244.99