Results 1 to 6 of 6

Thread: 7.2.0 usb persistent image question

Hybrid View

  1. #1
    Member registered user
    Join Date
    Nov 2006
    Posts
    30

    7.2.0 usb persistent image question

    I recently bought 7.2.0 dvd on a usb drive from a retailer listed in the Order Knoppix section of the site. The problem is unlike previous versions I have had, the option to create a persistent image is not displayed during boot. I found that my session was automatically saved on the usb after I shut down, which I do not want. Usually I choose not to have persistence or encryption.

    Is this some kind of flaw or has something changed?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Perhaps the retailer has already created a persistent memory for you. Have a look at
    http://knoppix.net/wiki/Category:Har...e_Installation
    to learn more about the two different methods of persitent memory within Knoppix. If you don't like it, delete the file knoppix-data.img respectively the file knoppix-data.inf (and the content of the overlay partition).

  3. #3
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    In the link it says:Flash disk InstallBoot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk' (since Knoppix 7.1, respectively "experimental version" in Knoppix 7.05). There are two options to choose from:Installation on FAT32 with (optional) overlay file < 4GBInstallation on FAT32 with additional overlay partitionIn the first case you will get an installation of compressed filesysten Image and the persistent memory all within '/dev/sda1' (FAT32 formatted).In the other case you will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the persistent memory in '/dev/sda2' (ReiserFS formatted).What do I do if I don't want either type of persistent memory? ie: no persistent memory? Choose Cancel?Thanks.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you cancel the installation of persistent memory within 7.2.0, the installation is broken and you cannot use it. With earlier versions of Knoppix you have had the ability to pass over this step and always use the cheatcode "knoppix noimage".

  5. #5
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    So it is necessary to always create some persistent memory?And I can not use the noimage cheatcode?The vendor I bought my usb from said I could also edit the ' /boot/syslinux/syslinux.cfg' file with 'noimage' to make it permanent. No?Thanks again.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Yes, of course, you can use "noimage" too.
    http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering

    And after this you can delete the file '/mnt-system/KNOPPIX/knoppix-data.img(or .aes) or, in case of partition overlay, the content of the overlay within the second partition.

    I hope, KK will correct the little error within his script in the next version of Knoppix.
    Last edited by Werner P. Schulz; 10-05-2013 at 11:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


OWC 8TB Gemini Thunderbolt 3 Dock and RAID Station (2X4TB) OWCTB3RSDK08T picture

OWC 8TB Gemini Thunderbolt 3 Dock and RAID Station (2X4TB) OWCTB3RSDK08T

$339.00



Cenmate 2 Bay Raid Hard Drive Enclosure picture

Cenmate 2 Bay Raid Hard Drive Enclosure

$71.99



4 Bay 3.5Ó SATA III HDD NON-RAID Enclosure Ð Supports USB 3.0 & eSATA Interface picture

4 Bay 3.5Ó SATA III HDD NON-RAID Enclosure Ð Supports USB 3.0 & eSATA Interface

$120.98



8 Bay Tool Less Tray Hot Swap 2.5

8 Bay Tool Less Tray Hot Swap 2.5" 3.5" SATA Non Raid External USB 3.0 Enclosure

$251.99



LSI MegaRAID SAS 9271-8i 8-Port 6Gb/s SATA/SAS 1GB PCI-E 3.0 RAID Controller picture

LSI MegaRAID SAS 9271-8i 8-Port 6Gb/s SATA/SAS 1GB PCI-E 3.0 RAID Controller

$29.95



ADAPTEC ASR-7805 Single 6gb/s 8int Port SAS/SATA Raid Controller With Cache picture

ADAPTEC ASR-7805 Single 6gb/s 8int Port SAS/SATA Raid Controller With Cache

$12.00



G-TECHNOLOGY 0G02289 G-RAID External Hard Drive Array with Thunderbolt (no HDDs) picture

G-TECHNOLOGY 0G02289 G-RAID External Hard Drive Array with Thunderbolt (no HDDs)

$79.99



Adaptec 4-Port PCI-e SATA RAID Controller Card AAR-1430SA Low Profile picture

Adaptec 4-Port PCI-e SATA RAID Controller Card AAR-1430SA Low Profile

$15.99



G-SPEED ES 4-Bay RAID Enclosure Storage Array Tested and Working No Hard Drives picture

G-SPEED ES 4-Bay RAID Enclosure Storage Array Tested and Working No Hard Drives

$80.00



G-RAID G Technology 12 TB dual drive (6x2) With Thunderbolt 3, Gen 2 picture

G-RAID G Technology 12 TB dual drive (6x2) With Thunderbolt 3, Gen 2

$395.00