-
Junior Member
registered user
Installed 7.2 to hard drive. Where's syslinux.cfg?
I want to enable knoppix64 and no3d.
Can't find the file. Has it been renamed and placed somewhere?
-
With Knoppix HD install you have to use grub legacy (and not Syslinux/Isolinux).
Change the line starting with "kernel" of '/boot/grub/menu.lst':
add the option "no3d" and change the entry "/boot/vmlinuz" to the proper value you'll see at '/boot/'
For example:
Code:
kernel /boot/vmlinuz-3.9.6-64 root=/dev/sda2 ..... tz=Europe/Berlin ... no3d
-
Junior Member
registered user
Thank you for the quick reply! That did the trick!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2697v4 2.3GHz =36 Cores 64GB P246 650FLB
$279.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$49.99
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.42
DELL POWEREDGE FC640 Blade Server FX2 CTO Barebones iDrac Enterprise Warranty
$199.00
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
HP BL460c G10 Blade 2x Gold 6140 2.3GHz =36 Cores 128GB P204i-B QMH2672 2x 20GB
$642.00
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99