Results 1 to 2 of 2

Thread: Multiple Video Cards and getting xorg.conf set up properly for multihead

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    93

    Multiple Video Cards and getting xorg.conf set up properly for multihead

    I've always wanted to run dual video cards with linux. However, every time I try it I get really frustrated (because I don't really know what I'm doing with regards to X) and give up.

    I wish it were as easy as windows, where you just click on a few dialogs and things come up magically. I struggled with this so mightily I could just really say #%@#$#@$ and be happy with dualhead on a single card. Fiddling with /etc/X11/xorg.conf and trying to start X and trying over and over again. I had to go back to the internet many times to look for more ideas to try... This is so 1980s with manual configuration files and very little feedback as to what's going wrong. And I like to think that I'm fairly techno savvy.

    Knoppix works awesomely with a single video card with dual heads. ARandR is marvelous and "just works." However, things get tricky when you want to run multiple video cards.

    So I've got two cards: a geforce 7300 pci-e card with 2 heads and a geforce mx420 pci card with vga.

    Knoppix actually detects both perfectly and brings up a text display on both cards. The hard part is configuring the /etc/X11/xorg.conf file.

    Here's what "works for me":

    lspci

    1:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7300 LE] (rev a1)
    03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
    04:02.0 VGA compatible controller: NVIDIA Corporation NV17 [GeForce4 MX 420] (rev a3)

    card0 is the geforce 7300LE
    card1 is the geforce mx420

    so I need to know the actual outputs of each card, and you can see the pci BusID address by looking at /sys/class/drm

    knoppix@Microknoppix:~$ ls -l /sys/class/drm
    total 0
    lrwxrwxrwx 1 root root 0 Nov 23 22:29 card0 -> ../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card0-DVI-I-1 -> ../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DVI-I-1
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card0-TV-1 -> ../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-TV-1
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card0-VGA-1 -> ../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-VGA-1
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card1 -> ../../devices/pci0000:00/0000:00:1e.0/0000:04:02.0/drm/card1
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card1-TV-2 -> ../../devices/pci0000:00/0000:00:1e.0/0000:04:02.0/drm/card1/card1-TV-2
    lrwxrwxrwx 1 root root 0 Nov 24 05:26 card1-VGA-2 -> ../../devices/pci0000:00/0000:00:1e.0/0000:04:02.0/drm/card1/card1-VGA-2

    and

    knoppix@Microknoppix:~$ cat /sys/class/drm/*/status
    disconnected
    disconnected
    connected
    connected
    connected

    so it's VGA-1 on card0, VGA-2 and TV-2 on card1 are connected


    and excerpts from my xorg.conf from /etc/X11/xorg.conf

    # /etc/X11/xorg.conf

    Section "ServerLayout"
    Identifier "XFree86 Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"

    Option "Xinerama" "true"
    Option "Clone" "off"
    Option "AIGLX" "true"

    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    ModelName "Generic Monitor"
    EndSection

    Section "Monitor"
    Identifier "Monitor1"
    ModelName "Generic Monitor"
    EndSection

    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    VendorName "All"
    BoardName "All"
    BusID "PCI:4:2:0"
    Option "ZaphodHeads" "VGA-2"
    EndSection

    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    VendorName "All"
    BoardName "All"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "VGA-1"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Card1"
    Monitor "Monitor0"
    EndSection

    Section "Screen"
    Identifier "Screen1"
    Device "Card0"
    Monitor "Monitor1"
    EndSection

    I got another monitor and wanted to hook it up to card 0, so I added a few things:


    Section "ServerLayout"
    Identifier "X.org Configured"
    Option "Xinerama" "on"
    Option "Clone" "off"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1" #added screen 2 here

    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "AllowEmptyInput" "off"
    EndSection

    Section "Monitor"
    Identifier "Monitor2"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection

    Section "Device"
    Option "ZaphodHeads" "VGA-1"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection

    Section "Device"
    Option "ZaphodHeads" "DVI-I-1"
    Identifier "Card0-DVI"
    Driver "nouveau"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection

    Section "Screen"
    Identifier "Screen2"
    Device "Card0-DVI"
    Monitor "Monitor1"
    EndSection


    note that if you set the wrong screen number (like Screen 1 instead of Screen 0) in the Section "Device" the configuration will not work and you will get a message like this in /var/log/Xorg.0.log

    Xorg Screen 1 deleted because of no matching config

    This is an easy fix, just swap the screen numbers until it works. So I tried Screen 0 for Section "Device" Identifier Card0-DVI", and it didn't work so I went with Screen 1 which did. Note that this Screen number in the Section "Device" refers to the screens "internally numbered" for each head on a given card, and does not have anything to do with the Section "Screen". That was something I found a bit confusing.


    You can omit the Screen number in the Section "Device" but it will only display a clone of the other head on the card.

    a few tips and tricks:

    boot with "knoppix 2" and then use

    X -configure (to have Xorg try to generate an autoconfiguration, it puts a heck of a lot of crud into the file, but it does show you some ideas and structure. I think it made 7 different devices and screens, duplicating the card 3 or 4 times for different drivers)

    X -config <filename> (to have Xorg use a different file location than /etc/X11/xorg.conf)

    X -retro (to test your xorg.conf with a checkerboard background and the retro X pointer because when you launch X, the background is black and there's no mouse pointer)

    and also the CTRL+ALT+BACKSPACE keystroke to kill the X server.

    less /var/log/Xorg.0.log to see any error messages
    less /var/log/Xorg.0.log | grep EE (to see any error events)

    So I'd do a bunch of edits with "emacs /etc/X11/xorg.conf", then save the changes, and then launch "X -retro" to test them out. I'd exit the X server with CTRL+ALT+BACKSPACE. Once I'd get a setup that would work, I'd save it and reboot knoppix normally. (and I removed the line at the top of xorg.conf that tells knoppix to autogenerate this file on reboot.) Also note that I'm using knoppix with a "persistent" imagefile so /etc/X11/xorg.conf persists through reboots.

    You can also do the editing within X-windows if you're brave, just emacs /etc/X11/xorg.conf from a terminal window, then CTRL+ALT+BACKSPACE which will kill and relaunch the X session, reading in your new xorg.conf.

    My full xorg.conf:

    Section "ServerLayout"
    Identifier "X.org Configured"
    Option "Xinerama" "on"
    Option "Clone" "off"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"

    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "AllowEmptyInput" "off"
    EndSection

    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/X11/misc"
    FontPath "/usr/share/fonts/X11/cyrillic"
    FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/Type1"
    FontPath "/usr/share/fonts/X11/100dpi"
    FontPath "/usr/share/fonts/X11/75dpi"
    FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath "built-ins"
    EndSection

    Section "Module"
    Load "dbe"
    Load "dri"
    Load "dri2"
    Load "extmod"
    Load "glx"
    Load "record"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection

    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection

    Section "Device"
    Option "ZaphodHeads" "VGA-1"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection

    Section "Device"
    Option "ZaphodHeads" "DVI-I-1"
    Identifier "Card0-DVI"
    Driver "nouveau"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection

    Section "Device"
    Option "ZaphodHeads" "VGA-2"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:4:2:0"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Card1"
    Monitor "Monitor0"
    EndSection

    Section "Screen"
    Identifier "Screen1"
    Device "Card0"
    Monitor "Monitor1"
    EndSection

    Section "Screen"
    Identifier "Screen2"
    Device "Card0-DVI"
    Monitor "Monitor1"
    EndSection


    Section "DRI"
    Mode 0666
    EndSection

  2. #2
    Member registered user
    Join Date
    Apr 2007
    Posts
    93
    I thought I had this multiple video card thing figured out... and so I tried a radeon 7000 PCI with my geforce 7300 PCI-E and couldn't get it work. And then I tried a geforce 6200 PCI with a geforce 7300 PCI-E and couldn't get that to work properly. I could actually get all 4 monitors to come up with "X -retro" with a heck of a lot of fiddling on xorg.conf... but it wouldn't work properly with the full X session GUI. I guess that getting the geforce 7300 PCI-E to work with a Geforce MX420 PCI was a lucky combination. Too bad. I really really wanted it to work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Allen-Bradley 1783-BMS20CA AB 1783-BMS20CA Stratix 5700 Managed Ethernet Switch picture

Allen-Bradley 1783-BMS20CA AB 1783-BMS20CA Stratix 5700 Managed Ethernet Switch

$2840.00



New 1783-BMS10CGP 1783BMS10CGP Stratix 5700 10 Port Managed Switch picture

New 1783-BMS10CGP 1783BMS10CGP Stratix 5700 10 Port Managed Switch

$2935.00



1PC ALLEN BRADLEY 1783-BMS10CGL SER A ETHERNET SWITCH 1783BMS10CGL NEW IN BOX picture

1PC ALLEN BRADLEY 1783-BMS10CGL SER A ETHERNET SWITCH 1783BMS10CGL NEW IN BOX

$2020.00



8 Ports Unmanaged Industrial Ethernet Switch Network Gigabit Ethernet Switch picture

8 Ports Unmanaged Industrial Ethernet Switch Network Gigabit Ethernet Switch

$76.50



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch

$74.00



Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping picture

Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping

$49.95



HP JG937A Flexnetwork 5130-48G PoE+ 48-Port Gigabit Network Switch picture

HP JG937A Flexnetwork 5130-48G PoE+ 48-Port Gigabit Network Switch

$70.95



HP ProCurve 2810-48G 48 Port Gigabit Rack Mount Ethernet Network Switch FreeShip picture

HP ProCurve 2810-48G 48 Port Gigabit Rack Mount Ethernet Network Switch FreeShip

$52.99