Results 1 to 4 of 4

Thread: dsl network enabled but internet not working

  1. #1
    Junior Member
    Join Date
    Sep 2012
    Posts
    17

    dsl network enabled but internet not working

    Hello to all,I am using knoppix 7.2 , I seem to have some problems with accessing the internet. I have a dsl connection (dynamic ip) type and I enable it but the internet does not work , for example I can`t use the 'sudo apt-get' commands because it obviesly gives connection error but i can ping myself, altough I cant ping any other sites also note that there is no error in the network connection it seems to be connected and ok here are some command outputs:

    knoppix@Microknoppix:/etc$ ping localhost
    PING Microknoppix (127.0.0.1) 56(84) bytes of data.
    64 bytes from Microknoppix (127.0.0.1): icmp_req=1 ttl=64 time=0.040 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=2 ttl=64 time=0.041 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=3 ttl=64 time=0.054 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=4 ttl=64 time=0.043 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=5 ttl=64 time=0.041 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=6 ttl=64 time=0.043 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=7 ttl=64 time=0.042 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=8 ttl=64 time=0.040 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=9 ttl=64 time=0.041 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=10 ttl=64 time=0.043 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=11 ttl=64 time=0.041 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=12 ttl=64 time=0.042 ms
    64 bytes from Microknoppix (127.0.0.1): icmp_req=13 ttl=64 time=0.030 ms


    knoppix@Microknoppix:/etc$ ping google.com
    ping: unknown host google.com
    knoppix@Microknoppix:/etc$ ping www.google.com
    ping: unknown host www.google.com

    knoppix@Microknoppix:/etc$ ifconfig
    eth0 Link encap:Ethernet HWaddr 50:e5:49:d7:5e:e9
    inet6 addr: fe80::52e5:49ff:fed7:5ee9/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:301 errors:0 dropped:0 overruns:0 frame:0
    TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:34475 (33.6 KiB) TX bytes:34144 (33.3 KiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:406 errors:0 dropped:0 overruns:0 frame:0
    TX packets:406 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:30808 (30.0 KiB) TX bytes:30808 (30.0 KiB)

    ppp0 Link encap:Point-to-Point Protocol
    inet addr:79.119.163.222 P-t-P:10.0.0.1 Mask:255.255.255.255
    inet6 addr: fe80::4f77:a3de/10 Scope:Link
    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
    RX packets:227 errors:0 dropped:0 overruns:0 frame:0
    TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:24738 (24.1 KiB) TX bytes:21334 (20.8 KiB)

    resolv.conf is empty

    resolv.conf.tmp:

    # Generated by NetworkManager
    nameserver 193.231.252.1
    nameserver 213.154.124.1

    resolv.conf.pppd-backup.ppp0:

    # Generated by NetworkManager
    nameserver 193.231.252.1
    nameserver 213.154.124.1

    My internet connection worked well until now and work right now under windows xp, knoppix is on usb stick.

  2. #2
    Junior Member
    Join Date
    Sep 2012
    Posts
    17
    It`s been aalmost a week , can anybody provide an answer to my problem???

  3. #3
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Please tell us, which file do you have in '/etc/NetworkManager/system-connections' and what is the content of it? (You must be root to read it.)

  4. #4
    Junior Member
    Join Date
    Sep 2012
    Posts
    17
    [pppoe]
    username='my username'
    password='and the password'

    [connection]
    id=RDS
    uuid=51867b63-ff06-4459-9a85-11fc3d816811
    type=pppoe
    autoconnect=false

    [ppp]
    lcp-echo-failure=5
    lcp-echo-interval=30

    [802-3-ethernet]
    duplex=full

    [ipv4]
    method=auto

    Everything coincides with what I`ve set up , the username and the password are ok too.
    This exact connection worked before but suddenly something happend.
    Could some ports be restricting packets???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System picture

IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System

$359.99



IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server picture

IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server

$399.99



IBM X3850 M2 4U Rack Server BOOTS 4x Xeon MP 2.93Ghz Hot Swap 32GB RAM NO HDDs picture

IBM X3850 M2 4U Rack Server BOOTS 4x Xeon MP 2.93Ghz Hot Swap 32GB RAM NO HDDs

$279.99



IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU picture

IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU

$229.99



IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD picture

IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD

$74.50



ibm server z series picture

ibm server z series

$16000.00



IBM Cloud Object Storage Slicestor 2448 E5-2637 3.5Ghz 128GB DDR4 - NO HDD - NEW picture

IBM Cloud Object Storage Slicestor 2448 E5-2637 3.5Ghz 128GB DDR4 - NO HDD - NEW

$399.00



IBM mainframe server cpu IBM93 vintage cpu collector's item picture

IBM mainframe server cpu IBM93 vintage cpu collector's item

$125.99



IBM AC1 8722 4xIntel Xeon 2.2 GHz 8 Cores Server w/64GB/DVDRW/PS WORKS  picture

IBM AC1 8722 4xIntel Xeon 2.2 GHz 8 Cores Server w/64GB/DVDRW/PS WORKS

$83.95



IBM QRadar XX28-C 2U Server BOOTS 2x Xeon E5-2650 v3 2.3GHz 128GB RAM NO HDDs picture

IBM QRadar XX28-C 2U Server BOOTS 2x Xeon E5-2650 v3 2.3GHz 128GB RAM NO HDDs

$249.99