It`s been aalmost a week , can anybody provide an answer to my problem???
Hello to all,I am using knoppix 7.2 , I seem to have some problems with accessing the internet. I have a dsl connection (dynamic ip) type and I enable it but the internet does not work , for example I can`t use the 'sudo apt-get' commands because it obviesly gives connection error but i can ping myself, altough I cant ping any other sites also note that there is no error in the network connection it seems to be connected and ok here are some command outputs:
knoppix@Microknoppix:/etc$ ping localhost
PING Microknoppix (127.0.0.1) 56(84) bytes of data.
64 bytes from Microknoppix (127.0.0.1): icmp_req=1 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=2 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=3 ttl=64 time=0.054 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=4 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=5 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=6 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=7 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=8 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=9 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=10 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=11 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=12 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=13 ttl=64 time=0.030 ms
knoppix@Microknoppix:/etc$ ping google.com
ping: unknown host google.com
knoppix@Microknoppix:/etc$ ping www.google.com
ping: unknown host www.google.com
knoppix@Microknoppix:/etc$ ifconfig
eth0 Link encap:Ethernet HWaddr 50:e5:49:d7:5e:e9
inet6 addr: fe80::52e5:49ff:fed7:5ee9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:301 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34475 (33.6 KiB) TX bytes:34144 (33.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:406 errors:0 dropped:0 overruns:0 frame:0
TX packets:406 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:30808 (30.0 KiB) TX bytes:30808 (30.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:79.119.163.222 P-t-P:10.0.0.1 Mask:255.255.255.255
inet6 addr: fe80::4f77:a3de/10 Scope:Link
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:24738 (24.1 KiB) TX bytes:21334 (20.8 KiB)
resolv.conf is empty
resolv.conf.tmp:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
resolv.conf.pppd-backup.ppp0:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
My internet connection worked well until now and work right now under windows xp, knoppix is on usb stick.
It`s been aalmost a week , can anybody provide an answer to my problem???
Please tell us, which file do you have in '/etc/NetworkManager/system-connections' and what is the content of it? (You must be root to read it.)
[pppoe]
username='my username'
password='and the password'
[connection]
id=RDS
uuid=51867b63-ff06-4459-9a85-11fc3d816811
type=pppoe
autoconnect=false
[ppp]
lcp-echo-failure=5
lcp-echo-interval=30
[802-3-ethernet]
duplex=full
[ipv4]
method=auto
Everything coincides with what I`ve set up , the username and the password are ok too.
This exact connection worked before but suddenly something happend.
Could some ports be restricting packets???
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
HPE ProLiant MicroServer Gen10
$420.00
HP ProLiant MicroServer Generation 8 Xeon 4gb 4-BAY 2x500GB HDD (included)
$200.00
Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible
$220.48
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
$168.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00