It`s been aalmost a week , can anybody provide an answer to my problem???
Hello to all,I am using knoppix 7.2 , I seem to have some problems with accessing the internet. I have a dsl connection (dynamic ip) type and I enable it but the internet does not work , for example I can`t use the 'sudo apt-get' commands because it obviesly gives connection error but i can ping myself, altough I cant ping any other sites also note that there is no error in the network connection it seems to be connected and ok here are some command outputs:
knoppix@Microknoppix:/etc$ ping localhost
PING Microknoppix (127.0.0.1) 56(84) bytes of data.
64 bytes from Microknoppix (127.0.0.1): icmp_req=1 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=2 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=3 ttl=64 time=0.054 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=4 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=5 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=6 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=7 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=8 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=9 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=10 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=11 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=12 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=13 ttl=64 time=0.030 ms
knoppix@Microknoppix:/etc$ ping google.com
ping: unknown host google.com
knoppix@Microknoppix:/etc$ ping www.google.com
ping: unknown host www.google.com
knoppix@Microknoppix:/etc$ ifconfig
eth0 Link encap:Ethernet HWaddr 50:e5:49:d7:5e:e9
inet6 addr: fe80::52e5:49ff:fed7:5ee9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:301 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34475 (33.6 KiB) TX bytes:34144 (33.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:406 errors:0 dropped:0 overruns:0 frame:0
TX packets:406 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:30808 (30.0 KiB) TX bytes:30808 (30.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:79.119.163.222 P-t-P:10.0.0.1 Mask:255.255.255.255
inet6 addr: fe80::4f77:a3de/10 Scope:Link
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:24738 (24.1 KiB) TX bytes:21334 (20.8 KiB)
resolv.conf is empty
resolv.conf.tmp:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
resolv.conf.pppd-backup.ppp0:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
My internet connection worked well until now and work right now under windows xp, knoppix is on usb stick.
It`s been aalmost a week , can anybody provide an answer to my problem???
Please tell us, which file do you have in '/etc/NetworkManager/system-connections' and what is the content of it? (You must be root to read it.)
[pppoe]
username='my username'
password='and the password'
[connection]
id=RDS
uuid=51867b63-ff06-4459-9a85-11fc3d816811
type=pppoe
autoconnect=false
[ppp]
lcp-echo-failure=5
lcp-echo-interval=30
[802-3-ethernet]
duplex=full
[ipv4]
method=auto
Everything coincides with what I`ve set up , the username and the password are ok too.
This exact connection worked before but suddenly something happend.
Could some ports be restricting packets???
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
$16000.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM BladeCenter HS21 7995 AC1 Server - 1x Xeon E5440 2GB RAM - NO HDDs
$22.43
IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD)
$294.92
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95