It`s been aalmost a week , can anybody provide an answer to my problem???
Hello to all,I am using knoppix 7.2 , I seem to have some problems with accessing the internet. I have a dsl connection (dynamic ip) type and I enable it but the internet does not work , for example I can`t use the 'sudo apt-get' commands because it obviesly gives connection error but i can ping myself, altough I cant ping any other sites also note that there is no error in the network connection it seems to be connected and ok here are some command outputs:
knoppix@Microknoppix:/etc$ ping localhost
PING Microknoppix (127.0.0.1) 56(84) bytes of data.
64 bytes from Microknoppix (127.0.0.1): icmp_req=1 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=2 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=3 ttl=64 time=0.054 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=4 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=5 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=6 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=7 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=8 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=9 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=10 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=11 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=12 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=13 ttl=64 time=0.030 ms
knoppix@Microknoppix:/etc$ ping google.com
ping: unknown host google.com
knoppix@Microknoppix:/etc$ ping www.google.com
ping: unknown host www.google.com
knoppix@Microknoppix:/etc$ ifconfig
eth0 Link encap:Ethernet HWaddr 50:e5:49:d7:5e:e9
inet6 addr: fe80::52e5:49ff:fed7:5ee9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:301 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34475 (33.6 KiB) TX bytes:34144 (33.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:406 errors:0 dropped:0 overruns:0 frame:0
TX packets:406 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:30808 (30.0 KiB) TX bytes:30808 (30.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:79.119.163.222 P-t-P:10.0.0.1 Mask:255.255.255.255
inet6 addr: fe80::4f77:a3de/10 Scope:Link
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:24738 (24.1 KiB) TX bytes:21334 (20.8 KiB)
resolv.conf is empty
resolv.conf.tmp:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
resolv.conf.pppd-backup.ppp0:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
My internet connection worked well until now and work right now under windows xp, knoppix is on usb stick.
It`s been aalmost a week , can anybody provide an answer to my problem???
Please tell us, which file do you have in '/etc/NetworkManager/system-connections' and what is the content of it? (You must be root to read it.)
[pppoe]
username='my username'
password='and the password'
[connection]
id=RDS
uuid=51867b63-ff06-4459-9a85-11fc3d816811
type=pppoe
autoconnect=false
[ppp]
lcp-echo-failure=5
lcp-echo-interval=30
[802-3-ethernet]
duplex=full
[ipv4]
method=auto
Everything coincides with what I`ve set up , the username and the password are ok too.
This exact connection worked before but suddenly something happend.
Could some ports be restricting packets???
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00