It`s been aalmost a week , can anybody provide an answer to my problem???
Hello to all,I am using knoppix 7.2 , I seem to have some problems with accessing the internet. I have a dsl connection (dynamic ip) type and I enable it but the internet does not work , for example I can`t use the 'sudo apt-get' commands because it obviesly gives connection error but i can ping myself, altough I cant ping any other sites also note that there is no error in the network connection it seems to be connected and ok here are some command outputs:
knoppix@Microknoppix:/etc$ ping localhost
PING Microknoppix (127.0.0.1) 56(84) bytes of data.
64 bytes from Microknoppix (127.0.0.1): icmp_req=1 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=2 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=3 ttl=64 time=0.054 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=4 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=5 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=6 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=7 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=8 ttl=64 time=0.040 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=9 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=10 ttl=64 time=0.043 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=11 ttl=64 time=0.041 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=12 ttl=64 time=0.042 ms
64 bytes from Microknoppix (127.0.0.1): icmp_req=13 ttl=64 time=0.030 ms
knoppix@Microknoppix:/etc$ ping google.com
ping: unknown host google.com
knoppix@Microknoppix:/etc$ ping www.google.com
ping: unknown host www.google.com
knoppix@Microknoppix:/etc$ ifconfig
eth0 Link encap:Ethernet HWaddr 50:e5:49:d7:5e:e9
inet6 addr: fe80::52e5:49ff:fed7:5ee9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:301 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34475 (33.6 KiB) TX bytes:34144 (33.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:406 errors:0 dropped:0 overruns:0 frame:0
TX packets:406 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:30808 (30.0 KiB) TX bytes:30808 (30.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:79.119.163.222 P-t-P:10.0.0.1 Mask:255.255.255.255
inet6 addr: fe80::4f77:a3de/10 Scope:Link
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:24738 (24.1 KiB) TX bytes:21334 (20.8 KiB)
resolv.conf is empty
resolv.conf.tmp:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
resolv.conf.pppd-backup.ppp0:
# Generated by NetworkManager
nameserver 193.231.252.1
nameserver 213.154.124.1
My internet connection worked well until now and work right now under windows xp, knoppix is on usb stick.
It`s been aalmost a week , can anybody provide an answer to my problem???
Please tell us, which file do you have in '/etc/NetworkManager/system-connections' and what is the content of it? (You must be root to read it.)
[pppoe]
username='my username'
password='and the password'
[connection]
id=RDS
uuid=51867b63-ff06-4459-9a85-11fc3d816811
type=pppoe
autoconnect=false
[ppp]
lcp-echo-failure=5
lcp-echo-interval=30
[802-3-ethernet]
duplex=full
[ipv4]
method=auto
Everything coincides with what I`ve set up , the username and the password are ok too.
This exact connection worked before but suddenly something happend.
Could some ports be restricting packets???
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$269.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
$198.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs
$325.00
supermicro 1u server chassis 512L-200B w/260w PSU & extra split mobo controller
$80.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00