-
Junior Member
Flash Player no longer Directly Supports Linux
Introduction:As of flash player >11.2 adobe will no longer be producing a stand-alone version for Linux or Mac computers. Instead, users will have to install Google Chrome which contains flash as an extension called "Pepper Flash", or alternatively a version of Pepper-Flash that has been extracted from Google Chrome by other means.
This has created problems which I will explain below.My OS set-up:I have Knoppix 7.2 installed on a 8Gb memory stick with a knoppix-data.img of 3.4Gb. My browser is Chromium Version 31.0.1650.63 (not Google Chrome). The Flash-player version 11.2 (last stand alone version)
Problem:One of my favourite web sites has just started streaming videos using flash-player ver 11.7 which has forced me to install pepper-flash. However, when I attempt to install the file (pepperflashplugin-nonfree 1.2) using Synaptic Package Manager I receive an error telling me the package is broken.
On trying fix the package I get the following errors:
E: Unable to correct problems, you have held broken packages.
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
E: Unable to correct dependencies
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
E: Unable to correct dependenciesI've tried using other package managers but receive the same message.
I've been able to download the file (pepperflashplugin-nonfree_1.2.tar.gz) from the Debian web site but it is in the format (*tar.gz) which I am unable to install. An ulternative would be to install Google Chrome but I only want to do this as a last resort. So I am left with the other 2 methods of the broken package or a file I don't know how to install.
Help!
Last edited by Werner P. Schulz; 01-11-2014 at 01:19 PM.
Reason: formatted by mod
-
Senior Member
registered user
I've tried using other package managers but receive the same message.
I would suggest that you close Synaptic Package Manager and open an LXTerminal. Issue the following commands and describe which packages raise problems.
Code:
sudo apt-get update
sudo apt-get install pepperflashplugin-nonfree
-
Junior Member
Hi klaus,Thank you for your prompt reply. I did try from the command line before, this is what I get:
Code:
root@Microknoppix:/home/knoppix# sudo apt-get install pepperflashplugin-nonfree
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed.
This may mean that you have requested
an impossible situation or if you are using
the unstable distribution that some required
packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
pepperflashplugin-nonfree :
Depends: libpango-1.0-0 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
The problem seems to be with "libpango-1.0-0", I have a sneaky suspicion it conflicts with a similar package call "libpango1.0-0" but this is just a guess on my part.
-------------------------------------
You can use the "Go Advanced" button to have more abilities to format the posting; before sending your posting use "Preview" to see how it looks like.
If "noscript" (within Iceweasel/Firefox) is active for http://knoppix.net/forum/ disable it for this website; otherwise you cannot use the format abilities.
wps
Last edited by Werner P. Schulz; 01-11-2014 at 04:38 PM.
Reason: formatted by mod
-
Senior Member
registered user
I think the next attempt could be
Code:
sudo apt-get update
sudo apt-get -f install
You have to read the messages carefully because sometimes the package management software wants to remove packages which are essential for your work.
If everything went well you could try
Code:
sudo apt-get install pepperflashplugin-nonfree libpango-1.0-0
Most probably apt-get will tell you why it cannot install libpango-1.0-0.
-
Junior Member
Klaus,
Thanks again for replying. I had already done your first recommendation, namely:
Code:
sudo apt-get updatesudo
apt-get -f install
I have just carried out your second step and received the following message:
Code:
root@Microknoppix:/home/knoppix# sudo apt-get install pepperflashplugin-nonfree libpango-1.0-0
Reading package lists...
DoneBuilding dependency tree Reading state information...
DoneSome packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.The following information may help to resolve the situation:
The following packages have unmet dependencies:
libpango-1.0-0 : Depends: libglib2.0-0 (>= 2.35.9) but 2.33.12+really2.32.4-5 is to be installed
Breaks: libpango1.0-0 (< 1.32.5-2) but 1.30.0-1 is to be installed
E: Unable to correct problems, you have held broken packages.
I'm not 100% sure what the above means. I presume the following dependencies/upgrades are required:
force upgrade to: libglib2.0-0 ver 2.36 (testing)
force upgrade to: libpango1.0-0 ver 1.36.0-1 +b2 (testing).
Please let me know if I am to proceed with the above?
One other thing, I previously tried to install "libpango-1.0-0" from the Synaptic Package Manager but it told me a whole list of major packages would be remove such as AbiWord and Chromium, so immediately aborted the installation!!!
Thanks,
Peter
-
I don't know if this will help you, but I know Aptitude suggests removing Adriane-x and several of its dependencies when I try upgrading Libpango. Assuming you don't need accessibility software, marking ariane-x and its dependencies as automatically installed and allowing aptitude(or another package manager) to remove them as "no longer needed" might resolve whatever issue prevents you from upgarding libpango, and by extension pepperflash. o
-
Junior Member
Jeffery,
Thanks for you reply. I removed ariane-x which also removed ariane and then tried to install libpango-1.0-0 with the same problem as before. There is another file called libpango1.0-0 whith exactly the same funsions. I tried to remove this file, but as I mesioned in another post it wanted to remove other packages such as Abiword and chrome, so I aborted.
Thanks anyway!
-
^Considering how stripped down my Adriane Knoppix Install is, I suppose I shouldn't be surprised that you would have packages installed that a package manager would want to purge to allow the upgrade. Anyways, I think I have found a solution, though it might be riskier than you want to risk: in the file /etc/apt/apt.conf.d/00knoppix the second line sets the default release to Debian Wheezy in Knoppix 7.2.0. Apparently, this prevents a sizeable number of packages from being marked as upgradable by Aptitude(and persumably other apt frontends). Before commenting out this line, Aptitude only showed 10 packages as upgradable(5 of them being libpango related) and all of its resolution suggestions either gutted what I need to do web browsing(Adriane-x, gnome-orca, iceweasel, theirr dependencies) or cancelled the libpango upgrade. Commenting out this line caused Aptitude to show 400+ packages as upgradable, and while most of its resolution suggestions for trying to upgrade libpango still wanted me to gut my web browsing, it eventually gave me one what only involved upgrading installed packages or installing new packages. I upgraded libpango, uncommented the default release line, and now Aptitude is showing only 5 upgradable packages, nothing libpango related among them, and best I can tell, nothing has borken, but then again, Iceweasel is the only reason I ever leave text-only mode. On my test machine, I tried upgrading all of the newly marked as upgrable packages and lost sound halfway through the upgrade, so I would recommend caution with any software upgrades made visible by commenting out the default release line in /etc/apt/apt.conf.d/00knoppix. e
-
Junior Member
Jeffery,
Thank again for your help. My system doesn't contain a file called 00Knoppix. The only files in this directory are '10Periodic' and '99Synaptic'. However, I assume the following is a related file for package sources '/etc/apt/sources.list' which is shown below:
Code:
# Debian/Squeeze is the stable base for this installation
deb ftp://ftp.de.debian.org/debian/ stable main contrib non-free
deb http://security.debian.org stable/updates main contrib non-free
# testing/unstable/experimental contain newer versions, but
# packages from there are not being installed by default, unless
# they came from there in the first place.
deb ftp://ftp.de.debian.org/debian/ testing main contrib non-free
deb http://security.debian.org testing/updates main contrib non-free
deb ftp://ftp.de.debian.org/debian/ unstable main contrib non-free
deb http://ftp.de.debian.org/debian experimental main contrib non-free
# Debian/volatile contains quickly changing data like spam- and virusfilter databases
# Does not exist anymore
# deb http://volatile.debian.org/debian-volatile stable/volatile main contrib non-free
deb http://ftp.de.debian.org/debian stable-updates main contrib non-free
# Knoppix repository
deb http://debian-knoppix.alioth.debian.org ./
# x2go
# deb http://x2go.obviously-nice.de/deb/ lenny main
# deb http://packages.x2go.org/debian squeeze main
deb http://packages.x2go.org/debian wheezy main
deb http://packages.x2go.org/debian sid main
# Debian Multimedia, contains non-free software like acrobat reader
# deb http://www.deb-multimedia.org squeeze main non-free
deb http://http.us.debian.org/debian/ wheezy contrib non-free main
Actually I altered the above file some time ago replacing 'squeezy' with 'wheezy' due to another unrelated problem. So if I understand things correctly, I am already down loading 'wheezy' updates. However, I use Synaptic Package installer which seems to have a mind of its own so I am not sure what it is downloading, although there are some squeezy versions among the updates.
I've basically made very few changes to the standard Knoppix 7.2 system, apart from adding Chromium and a few other minor programs, such as package installers, as well as installing very few updates except for the packages I use. I'm running on a memory stick so have very little space left in the knoppix-dada.img file.
Thank anyway,
Peter
-
I upgraded libpango, uncommented the default release line, and now Aptitude is showing only 5 upgradable packages, nothing libpango related among them, and best I can tell, nothing has borken, but then again, Iceweasel is the only reason I ever leave text-only mode.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco IE-3000-8TC Industrial Ethernet 8 Ports Managed Switch 1 Year Warranty picture](/store/img/g/cc0AAOSwRA1kW8cD/s-l225/Cisco-IE-3000-8TC-Industrial-Ethernet-8-Ports-Mana.jpg)
Cisco IE-3000-8TC Industrial Ethernet 8 Ports Managed Switch 1 Year Warranty
$114.00
![Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-UK picture](/store/img/g/eXQAAOSwe5tlUlGH/s-l225/Cisco-SG110-8-Port-Gigabit-Ethernet-Switch-SG110D-.jpg)
Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-UK
$39.00
![Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture](/store/img/g/SZwAAOSw4HJlrp5Y/s-l225/Cisco-Nexus-48-Port-10G-SFP-Switch-N9K-9396PX-w-9K.jpg)
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
![HP ProCurve 4108gl J4865A Modular Network Switch picture](/store/img/g/2oAAAOSwrnBlLenS/s-l225/HP-ProCurve-4108gl-J4865A-Modular-Network-Switch.jpg)
HP ProCurve 4108gl J4865A Modular Network Switch
$119.99
![New Linksys SE3005 5-port Gigabit Ethernet Switch picture](/store/img/g/Y~IAAOSwyoJhBo7s/s-l225/New-Linksys-SE3005-5-port-Gigabit-Ethernet-Switch.jpg)
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
![Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture](/store/img/g/AscAAOSwIihhBpA8/s-l225/Linksys-SE3008-8-Ports-Rack-Mountable-Gigabit-Ethe.jpg)
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
![NetGear ProSafe GS748T V4 48-Port Gigabit Smart Switch w/ Ears + Cord picture](/store/img/g/oE0AAOSw6yxmCse5/s-l225/NetGear-ProSafe-GS748T-V4-48-Port-Gigabit-Smart-Sw.jpg)
NetGear ProSafe GS748T V4 48-Port Gigabit Smart Switch w/ Ears + Cord
$30.00
![Netgear Prosafe GS724T V2 24-Port 10/100/1000 Gigabit Ethernet Network Switch picture](/store/img/g/3U4AAOSwYG9hHmBI/s-l225/Netgear-Prosafe-GS724T-V2-24-Port-10-100-1000-Giga.jpg)
Netgear Prosafe GS724T V2 24-Port 10/100/1000 Gigabit Ethernet Network Switch
$27.99
![Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture](/store/img/g/kjQAAOSwNkhj0o7Y/s-l225/Fortinet-FortiSwitch-FS-124D-POE-24-Port-Gigabit-E.jpg)
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
![Netgear ProSafe S3300-52X-POE+ 48-Port Gigabit PoE+ Stackable Network Switch picture](/store/img/g/GFcAAOSw9MVmJpFs/s-l225/Netgear-ProSafe-S3300-52X-POE-48-Port-Gigabit-PoE-.jpg)
Netgear ProSafe S3300-52X-POE+ 48-Port Gigabit PoE+ Stackable Network Switch
$99.99