You can find PCManFM within the panel at the bottom of the screen - the 2nd icon from left... or where is this PCManFM located?
Have a look at Cheatcodes.
Hello klaus2008 thanks for the help.
I doubt my PC is so advanced anyway these are my specs: http://prntscr.com/2m0h0n
Can you tell from this info if that's the case?
Otherwise can you point me in the right direction on these nodrm or nofb cheatcodes and how to use them?
Thank you.
You can find PCManFM within the panel at the bottom of the screen - the 2nd icon from left... or where is this PCManFM located?
Have a look at Cheatcodes.
Yes it worked thank you!
Of course problems didn't stop there since, once in Knoppix, it wouldn't let me mount my Windows partition citing an "unclean file system" and problems with the hibernation file despite I have hibernation and sleeping disabled.
This can be sorted disabling quick boot in bios and restarting the system (not shutting down and re-powering) if anyone ends in my same problems.
Hi Werner P. Schulz,
Although I managed to make Knoppix work that solution is not the best to copy stuff off my ext hdd since it's very slow and cuts me off from my PC for hours on end.
I did try your suggestion in VirtualBox but the hdd never appeared (I waited 15 minutes or so) although I did get the Windows pop up that tells me it's
loaded in VirtualBox.
Any further step I might attempt?
Thank you.
Are you sure the usb device doesn't appear within the left side of PCManFM?I did try your suggestion in VirtualBox but the hdd never appeared (I waited 15 minutes or so) although I did get the Windows pop up that tells me it's loaded in VirtualBox.
Please follow my suggestion once more and tell us the output ofandCode:blkidin the terminal.Code:mount
Hi Werner P. Schulz,
This is the result: http://prntscr.com/2nzja4
Any good news?
Thank you
I cannot see in your example if you are working within VirtualBox or not. Please compare it with my example; here you can see my external drive "KNOPPIX" (/dev/sdb1) mounted as '/media/sdb1'.
Hi Werner P. Schulz,
Yes I was working within VirtualBox when i took the screenshot.
It is all the same to your picture, I just miss the tick symbol next to the usb hdd but, as i wrote previously, Windows does tell me it disconnected the usb drive and connected it inside Virtualbox.
Maybe i created the virtual box with wrong parameters (I used the recommended ones in the walkthrough)?
Thank you.
So when I add the disk like you showed me in the picture it doesn't appear as I told you.
But if after a while I try to add it again this is the result:
http://prntscr.com/2o63r1
http://prntscr.com/2o63sc
I don't mind waiting but, if that is the problem, how long does it take?
The drive does nothing and doesn't spin so i doubt is that.
Thank you.
If all went well you can see the USB drive in the VirtualBox guest within about five seconds. I fear your external drive has a serious damage.I don't mind waiting but, if that is the problem, how long does it take?
@ Threshold:
I would suggest that you terminate your VirtualBox session and wait until Windows says your HDD has been connected. Then restart your VirtualBox session and reconnect your HDD to the VirtualBox.
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
ASROCK Micro ATX Motherboard B250M PRO4 Chipset Intel 250, DDR4, LGA 1151
$64.99
***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3
$27.77
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$99.00
Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151
$31.95
ASRock B660M PRO RS LGA 1700 Intel SATA 6Gb/s DDR4 Micro ATX Motherboard
$94.99
ASUS Q87M-E/CSM Intel Q87 Chipset DDR3 mATX LGA1150 Motherboard Tested
$48.95
MSI A520M-A PRO AM4 AMD A520 USB3.2 Gen1 Micro-ATX Motherboard
$69.99
GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box
$115.00
BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled
$59.99