You can also use right mouse click on the device within the left side of PCManFM.
Hi all,
It would always bother me to just unplug my flash drives under linux/knoppix without cleanly unmounting them. Under windows you have the "Safely remove devices" on the taskbar. So I did a bit of searching and if you use the command line:
udisks --detach /dev/sdg
where /dev/sdg is the location of the flash drive, it will be detached and powered down (assuming you haven't still got it mounted.)
You can also use right mouse click on the device within the left side of PCManFM.
Because I don't fully trust any file managers for such tasks, I normally use the command line, with mount/umount, and sync. That's of course old-fashioned and awkward, but it works safely. In particular, running sync can give some unexpected results when you just thought everything was written to disk already. It wasn't.
If you try to unmount an USB device within PCManFM as I described you'll get this message, if there are any jobs not finished.
Remount.png
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM
$1869.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99