You can also use right mouse click on the device within the left side of PCManFM.
Hi all,
It would always bother me to just unplug my flash drives under linux/knoppix without cleanly unmounting them. Under windows you have the "Safely remove devices" on the taskbar. So I did a bit of searching and if you use the command line:
udisks --detach /dev/sdg
where /dev/sdg is the location of the flash drive, it will be detached and powered down (assuming you haven't still got it mounted.)
You can also use right mouse click on the device within the left side of PCManFM.
Because I don't fully trust any file managers for such tasks, I normally use the command line, with mount/umount, and sync. That's of course old-fashioned and awkward, but it works safely. In particular, running sync can give some unexpected results when you just thought everything was written to disk already. It wasn't.
If you try to unmount an USB device within PCManFM as I described you'll get this message, if there are any jobs not finished.
Remount.png
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10
$34.94
Cisco SFP10GSR 10 Base SFP Module 10-2415-03 LN#56 5/2019 V03
$30.00
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$43.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$30.00
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 8
$24.00
Genuine Cisco SFP-H10GB-ACU10M, 1 Year Warranty and Free Ground Shipping
$13.00
Lifetime Warranty X520-DA2 Intel 10GB SFP+ Dual Port + 2x 10G Optics 2x 2M Cable
$31.00
Cisco GLC-SX-MMD 1000Base-SX 850nm 550m 10-2626-01 Transceiver Module New
$11.99
Dell N2048P 48 Port Gigabit Ethernet Switch PoE Network Gigabyte L2 2x10GbE SFP+
$45.00
Brocade 10GbE SFP+ SWL Transceiver XBR-000180 57-0000075-01
$8.00