You can also use right mouse click on the device within the left side of PCManFM.
Hi all,
It would always bother me to just unplug my flash drives under linux/knoppix without cleanly unmounting them. Under windows you have the "Safely remove devices" on the taskbar. So I did a bit of searching and if you use the command line:
udisks --detach /dev/sdg
where /dev/sdg is the location of the flash drive, it will be detached and powered down (assuming you haven't still got it mounted.)
You can also use right mouse click on the device within the left side of PCManFM.
Because I don't fully trust any file managers for such tasks, I normally use the command line, with mount/umount, and sync. That's of course old-fashioned and awkward, but it works safely. In particular, running sync can give some unexpected results when you just thought everything was written to disk already. It wasn't.
If you try to unmount an USB device within PCManFM as I described you'll get this message, if there are any jobs not finished.
Remount.png
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge FC630 Xeon E5-2699 v4 256 GB DDR4 1U Server No Drives/No OS B9
$424.99
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99