You can also use right mouse click on the device within the left side of PCManFM.
Hi all,
It would always bother me to just unplug my flash drives under linux/knoppix without cleanly unmounting them. Under windows you have the "Safely remove devices" on the taskbar. So I did a bit of searching and if you use the command line:
udisks --detach /dev/sdg
where /dev/sdg is the location of the flash drive, it will be detached and powered down (assuming you haven't still got it mounted.)
You can also use right mouse click on the device within the left side of PCManFM.
Because I don't fully trust any file managers for such tasks, I normally use the command line, with mount/umount, and sync. That's of course old-fashioned and awkward, but it works safely. In particular, running sync can give some unexpected results when you just thought everything was written to disk already. It wasn't.
If you try to unmount an USB device within PCManFM as I described you'll get this message, if there are any jobs not finished.
Remount.png
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge MX7000 CTO Blade 8 slot 7U Chassis 6x 3000W 2x MX9002m
$2399.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99