Yes, there is a problem and I'll look for it this night.
Hi all,
I've installed knoppix7 to a 16Gb USB memory stick (/dev/sdb1) which I have been using for approx 12 months. Up till now, whenever I make changes to my system I manually backup knoppix-data.img to my HHD, however, I have just discovered kn-backup.sh on http://www.wp-schulz.de/.
I downloaded sh-backup.sh and installed to /usr/sbin. Using another 16Gb USB memory stick (which incidentally was formatted with knoppix7 on it) I have created a second 8Gb primary partition formatted to ext2 using gparted. When I run "sudo testdisk /list" I get the follow:
I presume the warnings above regarding CHS and LBA is because knoppix formats these disks according to MiB and not cylinder boundaries.Code:Disk /dev/sda - 15 GB / 14 GiB - CHS 14786 64 32 Partition Start End Size in sectors 1 * FAT32 LBA 3 60 1 14786 39 32 30274944 [KNOPPIX] Warning: Bad ending sector (CHS and LBA don't match) Disk /dev/sdb - 15 GB / 14 GiB - CHS 14900 64 32 Partition Start End Size in sectors 1 * FAT32 LBA 3 60 1 8712 63 32 17836160 [KNOPPIX2] Bad relative sector. 2 P Linux 8713 0 1 14899 63 32 12670976 [Backups]
When I run kn-backup and select "Backup whole persistent memory" I get the following error: "Cannot find any partition to use!"
I have read all relevant info on http://www.wp-schulz.de/ and can't see where I am going wrong...please help!
Yes, there is a problem and I'll look for it this night.
Last edited by Werner P. Schulz; 03-06-2014 at 08:04 PM.
Hi Werner,
I just down loaded your newer version of kn-backup.sh and it worked great. I've just done a complete backup and everything seems to have worded. It shrank my whole persistent memory down from 2.4 GiB to about 1GiB. My knoppix-data.img file is 3.8 GiB, so this is great, I''l therefore be using your program for my backups rather than manually copying knoppix-data.img every time I want to backup.
I'm sorry I didn't reply sooner, I saw your message from yesterday but didn't reply as I was doing some investigations of my own. It appears the memory sticks, which are "Verbatim store 'n go", create a secret partition where it is possible to lock the drive with a password. As a result, when you reformat it locks this secret partition at the very start of the disk so that any new partition starts at approx sector 8000 (4Mb). I've only just discovered this and have down loaded a program from verbatim to delete this locked partition. Hopefully this will allow me to repartition the drives so the CHS structure is neat and tidy, not that it really matters I suppose if it is formatted with logical block access (LBA) enabled.
Anyway, once again, thank you very much, I'll let you know if I have any other problems. As you probably already know, backing up is the easy part, it's when you need to restore a backup that is the important part!!!
Kind regards,
Peter
Last edited by AussiePete; 03-07-2014 at 01:05 PM.
Hello Peter,
I hope you'll test also the restore options of the script the next day and you don't find any more errors. I've tested the script over and over but not the last little change within it
Greetings Werner
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
HPE Proliant Microserver Gen10 X3421 Perf AMS, P03698-S01, 16GB Ram
$299.00
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED
$550.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen 10 AMD Opteron X3421, 8GB
$216.96
SuperMicro DATTO S3P4000 Server Xeon D-5141 2.4GHz 48GB RAM 2x 4TB SATA HDD
$279.98
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00