Yes, there is a problem and I'll look for it this night.
Hi all,
I've installed knoppix7 to a 16Gb USB memory stick (/dev/sdb1) which I have been using for approx 12 months. Up till now, whenever I make changes to my system I manually backup knoppix-data.img to my HHD, however, I have just discovered kn-backup.sh on http://www.wp-schulz.de/.
I downloaded sh-backup.sh and installed to /usr/sbin. Using another 16Gb USB memory stick (which incidentally was formatted with knoppix7 on it) I have created a second 8Gb primary partition formatted to ext2 using gparted. When I run "sudo testdisk /list" I get the follow:
I presume the warnings above regarding CHS and LBA is because knoppix formats these disks according to MiB and not cylinder boundaries.Code:Disk /dev/sda - 15 GB / 14 GiB - CHS 14786 64 32 Partition Start End Size in sectors 1 * FAT32 LBA 3 60 1 14786 39 32 30274944 [KNOPPIX] Warning: Bad ending sector (CHS and LBA don't match) Disk /dev/sdb - 15 GB / 14 GiB - CHS 14900 64 32 Partition Start End Size in sectors 1 * FAT32 LBA 3 60 1 8712 63 32 17836160 [KNOPPIX2] Bad relative sector. 2 P Linux 8713 0 1 14899 63 32 12670976 [Backups]
When I run kn-backup and select "Backup whole persistent memory" I get the following error: "Cannot find any partition to use!"
I have read all relevant info on http://www.wp-schulz.de/ and can't see where I am going wrong...please help!
Yes, there is a problem and I'll look for it this night.
Last edited by Werner P. Schulz; 03-06-2014 at 08:04 PM.
Hi Werner,
I just down loaded your newer version of kn-backup.sh and it worked great. I've just done a complete backup and everything seems to have worded. It shrank my whole persistent memory down from 2.4 GiB to about 1GiB. My knoppix-data.img file is 3.8 GiB, so this is great, I''l therefore be using your program for my backups rather than manually copying knoppix-data.img every time I want to backup.
I'm sorry I didn't reply sooner, I saw your message from yesterday but didn't reply as I was doing some investigations of my own. It appears the memory sticks, which are "Verbatim store 'n go", create a secret partition where it is possible to lock the drive with a password. As a result, when you reformat it locks this secret partition at the very start of the disk so that any new partition starts at approx sector 8000 (4Mb). I've only just discovered this and have down loaded a program from verbatim to delete this locked partition. Hopefully this will allow me to repartition the drives so the CHS structure is neat and tidy, not that it really matters I suppose if it is formatted with logical block access (LBA) enabled.
Anyway, once again, thank you very much, I'll let you know if I have any other problems. As you probably already know, backing up is the easy part, it's when you need to restore a backup that is the important part!!!
Kind regards,
Peter
Last edited by AussiePete; 03-07-2014 at 01:05 PM.
Hello Peter,
I hope you'll test also the restore options of the script the next day and you don't find any more errors. I've tested the script over and over but not the last little change within it
Greetings Werner
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99