Perhaps you have to declare lang=, keyboard= and xkeyboard=
I boot KNOPPIX 7.2.0 on a Toshiba Satelite P855, from a USB flash drive.
Note that booting from CD is not possible!
I have a Belgian AZERTY-keyboard (most options give a QWERTY-keyboard).
Setting the following parameters in Syslnx64.cfg
# KBDMAP be.kbd
LABEL knoppix
KERNEL linux
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
LABEL knoppix64
KERNEL linux64
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
The other language options are set to Lang=en
gives the desired azerty keyboard, but the main GUI menus are in RUSSIAN !!!
I would like to have them in English.
It seems that be stands for Bielo-Russian?
Perhaps you have to declare lang=, keyboard= and xkeyboard=
Werner, many thanks,
Puttig following lines in syslnx64.cfg does the job:
LABEL knoppix64
KERNEL linux64
APPEND lang=nl xkeyboard=be keyboard=be-latin1 apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
Dell PowerEdge VRTX Blade Server Enclosure Chassis Only NO HDD NO OS NO Blades
$399.99
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$179.99
Cisco UCS-B200-M3 Blade Server 2x E5-2620 2.00 GHz 384GB RAM
$50.00
HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00
(SINGLE) DELL POWEREDGE M640 SERVER BLADE Silver 4110 8C 2.1GHZ
$130.00
Dell PowerEdge FC830 blade server with 4x processors E5-4669v3 no memory
$179.00
Zima BLADE ZBB001-BK20032 NEW SEALED
$83.66
HP 447707-B21 ProLiant BL460c Server Blade (2 x 3.16GHz CPU/16GB RAM/No Drives)
$35.00
Dell PowerEdge M610 Blade Server
$80.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99