Perhaps you have to declare lang=, keyboard= and xkeyboard=
I boot KNOPPIX 7.2.0 on a Toshiba Satelite P855, from a USB flash drive.
Note that booting from CD is not possible!
I have a Belgian AZERTY-keyboard (most options give a QWERTY-keyboard).
Setting the following parameters in Syslnx64.cfg
# KBDMAP be.kbd
LABEL knoppix
KERNEL linux
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
LABEL knoppix64
KERNEL linux64
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
The other language options are set to Lang=en
gives the desired azerty keyboard, but the main GUI menus are in RUSSIAN !!!
I would like to have them in English.
It seems that be stands for Bielo-Russian?
Perhaps you have to declare lang=, keyboard= and xkeyboard=
Werner, many thanks,
Puttig following lines in syslnx64.cfg does the job:
LABEL knoppix64
KERNEL linux64
APPEND lang=nl xkeyboard=be keyboard=be-latin1 apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 256GB | P204I | 2x1.2TB 10KRPM
$2099.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00