Results 1 to 2 of 2

Thread: Introduction and a question

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Posts
    1

    Introduction and a question

    I am a newcomer to Knoppix, which I found after an Internet search. I was a RedHat user in earlier days (v7 - 9) and more recently had been using Open SUSE, v10 -v13.

    I learned about Knoppix as I was attempting to upgrade to SUSE 13 and kept crashing during the install. In hindsight, the cause was due to the hardware of the machine I was installing on: a repurposed HP with an AMD dual-core processor and on-board NVidia video.

    I obtained a Knoppix .iso and was able to get the machine to load from that. After that success I obtained the DVD .iso and explored that as well. Noting that HD install was possible, I installed to the 500 GB SATA drive.

    All was well until I opted to start the KDE desktop in lieu of the default. Once I selected KDE and rebooted the machine would crash repeatedly with the display garbled.

    More research led me to discover the problem with NVidia drivers; I obtained an ATI Radeon video card and installed it in the PCI Express slot, disabling on-board video. The machine is stable although I may need to address cooling and power supply concerns in the future.

    My reason for wanting a Linux / GNU OS machine was to avail myself of the use of the GCC compliler. I am a programmer and set myself the task to learn C++ and the X Window system.

    So I am posting today to thank all those who contributed to Knoppix 7.2 and to ask where the C libraries are in this installation? Code such as "#include <iostream.h> ..." causes a compiler error. The compiler is installed, but apparently the libraries are in non-standard locations? That's my best guess anyway.

    I did read the caution against installing Knoppix to the HD - belatedly. I suppose if I were to do it again I would start over from a Debian set of discs. My poor DSL connection from home makes that a very daunting download, however.

    Thanks for any guidance on the compiler issue.

    clh333

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Code such as "#include <iostream.h> ..." causes a compiler error.
    Have you already tried "#include <iostream>" instead of "#include <iostream.h>"?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Apple | Macintosh Performa 200 | Vintage Personal Computer | Beige Casing picture

Apple | Macintosh Performa 200 | Vintage Personal Computer | Beige Casing

$199.95



MacEffects Chrome / Clear Mechanical Keyboard for Vintage Apple IIe Computers picture

MacEffects Chrome / Clear Mechanical Keyboard for Vintage Apple IIe Computers

$225.00



VINTAGE 2004 Apple Silver APPLE PRODUCT PROFESSIONAL Pin in Original Container picture

VINTAGE 2004 Apple Silver APPLE PRODUCT PROFESSIONAL Pin in Original Container

$14.99



vintage apple macintosh computer m1787 color plus 14 inch monitor only 14

vintage apple macintosh computer m1787 color plus 14 inch monitor only 14"

$165.00



Vintage Apple Newton eMate 300 Laptop Computer 1997 H0208 Teal Blue Green Works picture

Vintage Apple Newton eMate 300 Laptop Computer 1997 H0208 Teal Blue Green Works

$189.99



Vintage Apple Computer Monitor picture

Vintage Apple Computer Monitor

$45.90



Vintage Classic Apple Macintosh System Boot Install Disk Floppy/CD *Pick Version picture

Vintage Classic Apple Macintosh System Boot Install Disk Floppy/CD *Pick Version

$10.39



Drakware ADB2USB - vintage Apple ADB to USB keyboard adapter picture

Drakware ADB2USB - vintage Apple ADB to USB keyboard adapter

$29.95



Vintage Apple Newton MessagePad 120 (H0131) picture

Vintage Apple Newton MessagePad 120 (H0131)

$150.00



Apple Macintosh Classic Vintage Computer M0420 from 1991 For Parts Or Repair  picture

Apple Macintosh Classic Vintage Computer M0420 from 1991 For Parts Or Repair

$90.00