-
Introduction and a question
I am a newcomer to Knoppix, which I found after an Internet search. I was a RedHat user in earlier days (v7 - 9) and more recently had been using Open SUSE, v10 -v13.
I learned about Knoppix as I was attempting to upgrade to SUSE 13 and kept crashing during the install. In hindsight, the cause was due to the hardware of the machine I was installing on: a repurposed HP with an AMD dual-core processor and on-board NVidia video.
I obtained a Knoppix .iso and was able to get the machine to load from that. After that success I obtained the DVD .iso and explored that as well. Noting that HD install was possible, I installed to the 500 GB SATA drive.
All was well until I opted to start the KDE desktop in lieu of the default. Once I selected KDE and rebooted the machine would crash repeatedly with the display garbled.
More research led me to discover the problem with NVidia drivers; I obtained an ATI Radeon video card and installed it in the PCI Express slot, disabling on-board video. The machine is stable although I may need to address cooling and power supply concerns in the future.
My reason for wanting a Linux / GNU OS machine was to avail myself of the use of the GCC compliler. I am a programmer and set myself the task to learn C++ and the X Window system.
So I am posting today to thank all those who contributed to Knoppix 7.2 and to ask where the C libraries are in this installation? Code such as "#include <iostream.h> ..." causes a compiler error. The compiler is installed, but apparently the libraries are in non-standard locations? That's my best guess anyway.
I did read the caution against installing Knoppix to the HD - belatedly. I suppose if I were to do it again I would start over from a Debian set of discs. My poor DSL connection from home makes that a very daunting download, however.
Thanks for any guidance on the compiler issue.
clh333
-
Senior Member
registered user
Code such as "#include <iostream.h> ..." causes a compiler error.
Have you already tried "#include <iostream>" instead of "#include <iostream.h>"?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
Samsung 16GB (2x8GB) DDR4 2400MHz PC4-19200 Desktop RAM Memory M378A1K43CB2-CRC
$19.95
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
TeamGroup 16GB PC4 2666 PC4 21300 DDR4 2666MHz 1.2V CL19 Desktop RAM Memory
$27.95
Micron (4X16GB) 64GB 2RX4 PC4-2133P-RB0-10 Registered ECC Memory #73
$54.99
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96