Perhaps you have to declare lang=, keyboard= and xkeyboard=
I boot KNOPPIX 7.2.0 on a Toshiba Satelite P855, from a USB flash drive.
Note that booting from CD is not possible!
I have a Belgian AZERTY-keyboard (most options give a QWERTY-keyboard).
Setting the following parameters in Syslnx64.cfg
# KBDMAP be.kbd
LABEL knoppix
KERNEL linux
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
LABEL knoppix64
KERNEL linux64
APPEND lang=be apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
The other language options are set to Lang=en
gives the desired azerty keyboard, but the main GUI menus are in RUSSIAN !!!
I would like to have them in English.
It seems that be stands for Bielo-Russian?
Perhaps you have to declare lang=, keyboard= and xkeyboard=
Werner, many thanks,
Puttig following lines in syslnx64.cfg does the job:
LABEL knoppix64
KERNEL linux64
APPEND lang=nl xkeyboard=be keyboard=be-latin1 apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge MX7000 CTO Blade 8 slot 7U Chassis 6x 3000W 2x MX9002m
$2399.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99