Results 1 to 8 of 8

Thread: inspiron 8200 lockup when starting pcmcia

  1. #1
    Member registered user
    Join Date
    Nov 2002
    Posts
    85

    inspiron 8200 lockup when starting pcmcia

    I just received a new dell inspiron 8200 and tried to boot up to knoppix. Every time it boots it locks up on loading pcmcia.
    I downloaded the latest version of Knoppix recently thinking that the new card services would fix the issue, but it still happens.

    I can boot up the laptop to knoppix by typing in "knoppix nopcmcia" but I really would like to be able to use my orinoco gold card.

    Has anyone else has this problem and know of a solution.

    inspiron 8200
    P4 1.8GHz
    256MB RAM
    30GIG HDD
    I just got it about 2 weeks ago, so it has the latest hardware in it.

    Thanks!

  2. #2
    HidDEN MiNdS
    Guest

    DELL Notebook

    Hi,

    I had the same problem with my Latitude.

    If you don't need PCMCIA then you can disable it on the boot prompt. Just type "knoppix nopcmcia". It is the "nopcmcia" boot option that does it.


    Regards


    Daniel

  3. #3
    Member registered user
    Join Date
    Nov 2002
    Posts
    85

    well...

    I really would like to use the pcmcia slots because i have a wireless network card.

    My builtin network card works but it would still be nice to use the wifi.

  4. #4
    makesomethingup
    Guest

    linux wireless

    I'm having the same prob. Check out http://linux-wlan.com/ and http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ for linux wireless drivers. I think you have to load a driver for your card and slot to be recognized. Unfortunately with Knoppix, that might mean installing on your hard drive with the command knoppix-hdinstall from the terminal window.

  5. #5
    SmokinGunz
    Guest
    To fix the Dell lockup on pcmcia you have to remaster the cd. Follow the guides that you can find on remastering, but before creating the ISO image, edit the /KNOPPIX/etc/pcmcia/config.opts and look for the line that says:

    include port 0x100-0x4ff, etc etc and take out the 2 entries that say port 0x800-0x80f and port 0x816-0x8ff so that the line now reads:


    include port 0x100-0x4ff, port 0xc00-0xcff

    remaster the cd and it should work just fine.

    or you could just start knoppix up with the nopcmcia option then copy the config.opts from /KNOPPIX/etc/pcmcia/config.opts to /etc/pcmcia/config.opts, edit the file making the changes, then run /etc/init.d/pcmcia start

  6. #6
    Member registered user
    Join Date
    Nov 2002
    Posts
    85

    THANKS!

    Thanks for the help. I'll try this out first thing in the morning when i get to work and see how it works!

    Thanks again.

  7. #7
    Junior Member
    Join Date
    Dec 2002
    Posts
    1
    I did the thing Gunz suggested and it worked to load my wireless card. However I can't get it to find/connect/configure to my network via wireless card. By curiousity I tried loading Knoppix without an ethernet cable plugged in and plugged it in after Knoppix had loaded and that also did not load/connect/configure my network so I'm guessing when Knoppix is booting it loads and configs your network. What I'm wondering is how do I do this once I'm in Knoppix?

  8. #8
    Member registered user
    Join Date
    Nov 2002
    Posts
    85

    yea!

    The latest version of knoppix that came out took care of that nasty dell notebook problem.
    No more workarounds!

    Thanks to whoever suggested that it should be added that to the CD, and keep up the good work!

Similar Threads

  1. Booting to Knoppix on a Dell Dimension 8200
    By rons1961 in forum General Support
    Replies: 0
    Last Post: 06-07-2004, 12:31 AM
  2. Lockup on Mnt Atempted Access
    By tl1moss in forum Laptops
    Replies: 0
    Last Post: 11-24-2003, 08:17 PM
  3. pcmcia card lockup MORE info
    By MrLockwood in forum Laptops
    Replies: 2
    Last Post: 05-20-2003, 04:33 AM
  4. pcmcia network card lockup
    By MrLockwood in forum Laptops
    Replies: 0
    Last Post: 05-11-2003, 07:03 PM
  5. Lockup problem on my VPR Matrix 185A5 Laoptop
    By dnt in forum General Support
    Replies: 0
    Last Post: 04-16-2003, 03:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield picture

ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield

$42.00



***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3 picture

***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3

$27.77



Asus B85M-E/CSM, LGA 1150 Intel Socket Motherboard picture

Asus B85M-E/CSM, LGA 1150 Intel Socket Motherboard

$39.99



ASRock B660M PRO RS LGA 1700 Intel SATA 6Gb/s DDR4 Micro ATX Motherboard picture

ASRock B660M PRO RS LGA 1700 Intel SATA 6Gb/s DDR4 Micro ATX Motherboard

$94.99



ASUS H110M-C LGA 1151 DDR4 SDRAM MSIP-REM-MSQ-H110M-C Desktop Motherboard picture

ASUS H110M-C LGA 1151 DDR4 SDRAM MSIP-REM-MSQ-H110M-C Desktop Motherboard

$43.95



ASUS Motherboard H81M-C | No CPU picture

ASUS Motherboard H81M-C | No CPU

$30.00



MSI A520M-A PRO AM4 AMD A520 USB3.2 Gen1 Micro-ATX Motherboard picture

MSI A520M-A PRO AM4 AMD A520 USB3.2 Gen1 Micro-ATX Motherboard

$69.99



ASUS Q87M-E/CSM Intel Q87 Chipset DDR3 mATX LGA1150 Motherboard Tested picture

ASUS Q87M-E/CSM Intel Q87 Chipset DDR3 mATX LGA1150 Motherboard Tested

$48.95



GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box picture

GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box

$115.00



BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled picture

BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled

$59.99