Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: Knoppix 7.3.0: comments, suggestions, tips & tricks

  1. #21
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Hello again, buymystock.

    I'm also fond of both Klaus K and his Knoppix product.
    Your join date shows you've been at this a lot longer than I have. Congratulations.

    My observation is that Klaus K does not frequent this forum, except rarely.
    He has not been very active even on his own forum lately, at least publicly,
    as you can see at:
    https://lists.debian.org/debian-knoppix/2014

    I think Klaus K does monitor his own forum, however, and will most likely respond
    to specific questions there, if the questions are reasonable and pertinent, and
    almost certainly if you've found a legitimate Knoppix problem that needs his attention.

    Werner points out that Klaus K may be seen on some past CeBIT sessions giving
    lectures there in both English and German.

  2. #22
    Member registered user
    Join Date
    Jun 2005
    Posts
    38
    Quote Originally Posted by Werner P. Schulz View Post
    CeBIT videos

    Not a real meeting with K. Knopper, but perhaps you would like to see him at CeBIT 2012
    http://www.techcast.com/events/cebit12/mi05/

    or at Cebit 2014 (German language only!)
    http://www.techcast.com/events/cebit...215/?q=di-1215
    Hi Werner,
    I am enjoying the video's from the links that you sent me! Viel Dank und Anerkennung! I will need to translate the German language video at CeBIT 2014; I cannot hear as well as I'd like to, however, when Klaus K speaks English, I can understand him better than many of the people that I've known for 30 years who ONLY speak English. Amazing.
    Viel Dank und Anerkennung!

  3. #23
    Member registered user
    Join Date
    Jun 2005
    Posts
    38
    Quote Originally Posted by utu View Post
    Hello again, buymystock.

    I'm also fond of both Klaus K and his Knoppix product.
    Your join date shows you've been at this a lot longer than I have. Congratulations.

    My observation is that Klaus K does not frequent this forum, except rarely.
    He has not been very active even on his own forum lately, at least publicly,
    as you can see at:
    https://lists.debian.org/debian-knoppix/2014

    I think Klaus K does monitor his own forum, however, and will most likely respond
    to specific questions there, if the questions are reasonable and pertinent, and
    almost certainly if you've found a legitimate Knoppix problem that needs his attention.

    Werner points out that Klaus K may be seen on some past CeBIT sessions giving
    lectures there in both English and German.
    Hi "utu" anew!
    Thanks for being so helpful, in addition to your well-mannered congratulatory expressive regarding my very good fortune of discovering Knoppix! This link to "lists.debian.org/debian-knoppix/2014" is a delight, with technical information from Klaus K that is presented in such a way as to allow easy and accurate perception. Archives starting in May of 2001 and leading through the years and months (2001--2014) are especially charming to me and to countless millions of people that have a strong interest in Knoppix (to such a degree that it causes some changes in their lifestyles in order to accommodate their loyalty to this outstanding Debian designed operating system).

  4. #24
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    2014 CeBIT English version of Knoppix 7.3

    .
    Klaus K speaking, in English, about Knoppix 7.3 at the 2014 CeBIT gathering:
    http://www.techcast.com/events/cebit...215/?q=fr-1215

    Dont play your video full-screen if you want to see Klaus' visual aids;
    they will be off-screen if you have Klaus in full-screen mode.

  5. #25
    Member registered user
    Join Date
    Jun 2005
    Posts
    38

    Klaus K speaking in the English language for an online video about Knoppix 7.3.

    Quote Originally Posted by utu View Post
    .
    Klaus K speaking, in English, about Knoppix 7.3 at the 2014 CeBIT gathering:
    http://www.techcast.com/events/cebit...215/?q=fr-1215

    Dont play your video full-screen if you want to see Klaus' visual aids;
    they will be off-screen if you have Klaus in full-screen mode.
    Greetings, utu,
    This is great! I am able to hear and understand the
    professor while he speaks in the English language during
    the recent CeBIT gathering as I click on the link that you sent me.
    Merriment and well-being will certainly follow the faithful and
    unwavering Knoppix apostles!

  6. #26
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124

    Part of thread moved

    I've moved all the postings within this thread about "UEFI and/or Secure Boot".

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R730XD 24x 2.5

DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED

$269.99



Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS picture

Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS

$721.06



HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD picture

HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD

$339.00



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2612.18



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$274.00



HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD picture

HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD

$196.95



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45 picture

HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45

$309.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00