Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Dual Boot question....

  1. #1

    Dual Boot question....

    OK, I have been running Knoppix on a HD for about a year I guess, the program is 7.0.5, and I have been having some issues with it and Wanted to upgrade to 7.2 after I got all of the files from the old system.

    The problem is that when I installed the new program I expected the installer to ask if I wanted a dual boot grub or at least create a second boot option in the existing grub, but that didn't happen, and after getting the installation done I was unable to boot the new installation.

    I thought that I could maybe use the linux boot repair to change the program to a dual boot, and boot both of them from it, but, it just created the grub anew and now I can only boot the new program and not the old one.

    What do I have to do to get both of these programs to boot from the grub, so I can transfer files and get information on what programming I need install from the old program until I have it all rebuilt in the new program. I have tried finding the files from Iceweasel for the favorites folder, and they just don't seem to be anywhere I can retrieve them, and no access to the menus to see what programming I need to install so I have to be able to access both to transfer everything over. How do I link the grub to both?
    Last edited by Werner P. Schulz; 04-08-2014 at 09:00 AM. Reason: Little reformat by mod

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Please tell us in which partition of your HD you had installed the old version of Knoppix (7.0.5) and in which partition you have now installed the new version (7.2). What is the ouput within a terminal of
    Code:
    fdisk -l
    Code:
    mcedit /boot/grub/menu.lst
    and
    Code:
    uname -a

  3. #3
    The old program is sdb1, and the new is sdb2. The sdb drive is an SSD, sdb3 and 4 are of course the swap files accordingly.

    fdisk -l is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk

    /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000

    Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary.

    Disk /dev/sdb: 256.1 GB, 256060514304 bytes 255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f343b Device Boot Start End Blocks Id System

    /dev/sdb1 * 81920000 250060799 84070400 83 Linux
    /dev/sdb2 331849728 500117503 84133888 83 Linux
    /dev/sdb3 2048 81919999 40958976 82 Linux swap / Solaris
    /dev/sdb4 250060800 331849727 40894464 82 Linux swap / Solaris
    Partition table entries are not in disk order

    Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d2eb1f0 Device Boot Start End Blocks Id System

    /dev/sdc1 2048 244195327 122096640 7 HPFS/NTFS/exFAT
    /dev/sdc2 244195328 488388607 122096640 7 HPFS/NTFS/exFAT
    /dev/sdc3 488388608 732581887 122096640 7 HPFS/NTFS/exFAT
    /dev/sdc4 * 732581888 976773119 122095616 7 HPFS/NTFS/exFAT
    Last edited by Werner P. Schulz; 04-08-2014 at 08:54 AM. Reason: Little reformat by mod

  4. #4
    mcedit is: mcedit is: mcedit /boot/grub/menu.lst Failed to run: Your old settings were migrated from /home/knoppix/.mc to Freedesktop recommended dirs. To get more info, please visit http://standards.freedesktop.org/bas...ec-latest.html uname -a is: Linux Microknoppix 3.9.6 #25 SMP PREEMPT Sat Jun 15 15:27:01 CEST 2013 i686 GNU/Linux
    Last edited by E-Tramp; 04-08-2014 at 01:02 AM.

  5. #5
    sorry about the lack of separation on these posts, but, your program keeps deleting the spaces and and lines between the information and because you limit the time to edit to so little time I have left them the way the program posts them. appearantly even if I try to edit it will still remove those spaces and lines.
    Last edited by E-Tramp; 04-08-2014 at 01:04 AM.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Use double "new line" for new section.

    You can use the "Go Advanced" button to have more abilities to format the posting; before sending your posting use "Preview" to see how it looks like.

    If "noscript" (within Iceweasel/Firefox) is active for http://knoppix.net/forum/ disable it for this website; otherwise you cannot use the format abilities.

    Below the editor area is the "Additional Options" area. With "Attachments => Manage Attachments" you can upload images and after this insert them in your posting.

    "mc" and "mcedit" had changed the location for the personal configuration files; therefore the unclear message. Start mcedit once more and it will work.

  7. #7
    Screenshot from 2014-04-15 21:29:12.png

    OK, here is mcedit, and I have disabled no scripts for this website so we will see how it does now.

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    To insert the boot option for the old installation start with
    Code:
    su
    mcedit /boot/grub/menu.lst
    and insert this three lines

    title KNOPPIX old installation
    root (hd1,0)
    kernel /boot/vmlinuz root=/dev/sdb1 (.. and rest of this line)

    Save with F2 and quit mcedit with F10. By the way "lang=" has no language declaration.

  9. #9
    (.. and rest of this line)
    by this you mean the line from fdisk above in frame three above? The disk coordinates for the programming?

  10. #10
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    (.. and rest of this line)
    instead of this insert all the same as in the 3rd line of the block

    title KNOPPIX
    root (hd1.1)
    kernel ...

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3 picture

***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3

$29.77



ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield picture

ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield

$42.00



Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151 picture

Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151

$31.95



GIGABYTE B560M DS3H AC LGA1200 Intel B560 SATA 6Gb/s Micro ATX Intel Motherboard picture

GIGABYTE B560M DS3H AC LGA1200 Intel B560 SATA 6Gb/s Micro ATX Intel Motherboard

$64.99



Gigabyte AMD B550 UD AC Gaming Motherboard - AMD B550 Chipset - AM4 Socket - AMD picture

Gigabyte AMD B550 UD AC Gaming Motherboard - AMD B550 Chipset - AM4 Socket - AMD

$89.99



Asus Prime B250M-C Motherboard Supports DDR4 Intel 7th Gen picture

Asus Prime B250M-C Motherboard Supports DDR4 Intel 7th Gen

$39.99



MSI B450M PRO-VDH MAX AM4 AMD B450 USB3.2 Micro-ATX Motherboard picture

MSI B450M PRO-VDH MAX AM4 AMD B450 USB3.2 Micro-ATX Motherboard

$67.99



Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk picture

Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk

$48.52



GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box picture

GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box

$112.00



BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled picture

BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled

$59.99