Hi
I am having difficulty getting the hour aspect of the time to be correct.
Right now for example, if I say ctrl-alt-f2, and run the date command, it says 16:17 EDT
but google says the current EDT time is 15:17
I would't mind being able to have the correct US time.
If I say lang=uk I find it doesn't give me the correct UK time either. It gets close but also 1hr off. The UK is on BST-British Summer Time(that's GMT+1). GMT=UTC.
My BIOS is currently 20:17 If I start knoppix with lang=uk it (if I recall) says the time is 21:17 BST. As if perhaps it is takeing my BIOSs time assumes(wrongly) that it's GMT when it's not it's BST. It then adds one to that time and calls it BST , resulting in a time it calls BST that is one hour ahead of the correct BST(which is the time set in my BIOS).
I could put my BIOS to the wrong time, putting it one hour back, then knoppix gets the correct time and rightly labels it BST. But I don't want to give my BIOS the wrong time.
I know there's a knoppix utc cheatcode but it's not so relevant as at the moment(summer) Britain is on UTC+1.(aka GMT+1 aka BST)
I tried apt-get install nptdate but it takes a long time to update and shows the wrong time until it has updated. As the GUI loads(if I do ctrl-alt-f2) and perhaps even into the GUI loading up a terminal, I do $date and it has the wrong time. Then I do it again and it gets the right time. But the clock in the bottom right still has the wrong time. I right click the clock and click something like "digital clock settings" and cancel and it causes the clock to update its time. I don't like that. If it's going to have the wrong time for any length of time i'd rather displayed an invalid time like 99:99 i don't like it dsplaying a time that is 1hr off, for any length of time.
If I could get a correct UK time that'd be good and i'd be interested in a correct US(EDT) time too.
Thanks
Last edited by terapin; 05-23-2014 at 08:33 PM.
Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod
$169.00
Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested
$599.99
Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License
$49.99
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$119.00
Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P
$178.99
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED
$749.95
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$74.95
Juniper Networks EX4550-32F-AFO 32x 1/10GbE SFP+ Network Switch w/ Power Cords
$299.00
Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested
$50.00