Results 1 to 1 of 1

Thread: difficulty getting the correct time (uk or us)

  1. #1

    difficulty getting the correct time (uk or us)

    Hi

    I am having difficulty getting the hour aspect of the time to be correct.

    Right now for example, if I say ctrl-alt-f2, and run the date command, it says 16:17 EDT

    but google says the current EDT time is 15:17

    I would't mind being able to have the correct US time.

    If I say lang=uk I find it doesn't give me the correct UK time either. It gets close but also 1hr off. The UK is on BST-British Summer Time(that's GMT+1). GMT=UTC.

    My BIOS is currently 20:17 If I start knoppix with lang=uk it (if I recall) says the time is 21:17 BST. As if perhaps it is takeing my BIOSs time assumes(wrongly) that it's GMT when it's not it's BST. It then adds one to that time and calls it BST , resulting in a time it calls BST that is one hour ahead of the correct BST(which is the time set in my BIOS).

    I could put my BIOS to the wrong time, putting it one hour back, then knoppix gets the correct time and rightly labels it BST. But I don't want to give my BIOS the wrong time.

    I know there's a knoppix utc cheatcode but it's not so relevant as at the moment(summer) Britain is on UTC+1.(aka GMT+1 aka BST)

    I tried apt-get install nptdate but it takes a long time to update and shows the wrong time until it has updated. As the GUI loads(if I do ctrl-alt-f2) and perhaps even into the GUI loading up a terminal, I do $date and it has the wrong time. Then I do it again and it gets the right time. But the clock in the bottom right still has the wrong time. I right click the clock and click something like "digital clock settings" and cancel and it causes the clock to update its time. I don't like that. If it's going to have the wrong time for any length of time i'd rather displayed an invalid time like 99:99 i don't like it dsplaying a time that is 1hr off, for any length of time.

    If I could get a correct UK time that'd be good and i'd be interested in a correct US(EDT) time too.

    Thanks
    Last edited by terapin; 05-23-2014 at 08:33 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Catalyst WS-C3650-48FS-E 48-Port Full PoE Switch (Refurbished) picture

Cisco Catalyst WS-C3650-48FS-E 48-Port Full PoE Switch (Refurbished)

$165.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Cisco Catalyst 2960 Series 48 Port Gigabit Ethernet Switch WS-C2960+48TC-L V02 picture

Cisco Catalyst 2960 Series 48 Port Gigabit Ethernet Switch WS-C2960+48TC-L V02

$39.99



Cisco Catalyst WS-C3850-48F-E PoE+ 48 Port V02 picture

Cisco Catalyst WS-C3850-48F-E PoE+ 48 Port V02

$300.00



Cisco WS-C3850-48T-S 48-Port Gigabit 3850 Switch w/ AC Power - 1 Year Warranty picture

Cisco WS-C3850-48T-S 48-Port Gigabit 3850 Switch w/ AC Power - 1 Year Warranty

$370.00



Cisco Catalyst C2960 24-Port PoE Ethernet Switch WS-C2960-24PC-L picture

Cisco Catalyst C2960 24-Port PoE Ethernet Switch WS-C2960-24PC-L

$49.99



Cisco SG350-52 | SG350-52-K9 | 52-Port Rack Mountable Gigabit Ethernet Switch picture

Cisco SG350-52 | SG350-52-K9 | 52-Port Rack Mountable Gigabit Ethernet Switch

$550.00



NEW CISCO DS-X9718-FAB1 MDS9718 Crossbar Switching Fabric Module picture

NEW CISCO DS-X9718-FAB1 MDS9718 Crossbar Switching Fabric Module

$749.98



Cisco WS-C3560CG-8PC-S 8 GE PoE 2x Dual Uplink IP Base Switch MW3G2 picture

Cisco WS-C3560CG-8PC-S 8 GE PoE 2x Dual Uplink IP Base Switch MW3G2

$149.00



NEW Sealed Cisco GLC-LH-SMD 1310 Gigabit Single Mode LX SFP US Shipping picture

NEW Sealed Cisco GLC-LH-SMD 1310 Gigabit Single Mode LX SFP US Shipping

$13.00