No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I have installed Knoppix 7.2 to the HDD of an old laptop (Pentium 2 mobile CPU @ 300Mhz and 200 Mb ram). All works pretty well considering the low spec. I installed a few things fine then I did a mark all upgrades in synaptic. The upgrade failed and now it's broken and anything I try to install fails. I have trawled the forums and saw reference that you should not try to upgrade the installed packages. What have I done, why shouldn't I have done it and can I fix this. My Linux knowledge is beginner. Many thanks.
No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I should have read that in the first place. My laptop cannot boot from USB and running from cd is too slow. Knoppix runs really well from the hdd install on this slow system so it is a shame it is not 'suitable'. It runs as well as any distro I have tried which is limited by the limited hardware. Thanks for the answer.
Knoppix is a Live Linux CD .... so it is a shame it is not 'suitable'.
Why does it have a hdd installer.
I meant that my laptop is not suitable for running knoppix as I cannot boot from USB. But it does beg the question why is there a hdd installer.
You can do the HW install, but it remains a Live system with all the limitations I've told you. HW install isn't a conjuring trick to change the action of Knoppix.
.
Greetings terrybull & Werner.
I have a similar situation where I'd like to do something like a
"poor-man's hdd install" of Knoppix. That is use a Knoppix LiveCD
to perform a Knoppix "Install to FlashDisk" but issuing the hdd descriptor
instead of a usb descriptor when asked.
I would expect this process to proceed to put something on the hdd,
but that perhaps the boot process would need some re-working, there
likely being some differences in booting hdds rather than usbs.
Somehow I expect the persistence process to be workable as well,
since that was part of the essence of the original "poor-man's install"
I was planning to use the following material as a guide to this
endeavor. Have I got something all wrong here or is this a viable
approach? Thanks in advance.
Read "Poor-Man's Install" at:
http://smtp.knoppix.net/wiki/Categor...e_Installation
See also this ref and its variations:
http://g33kgrrl.wordpress.com/2009/0...livepartition/
Last edited by utu; 05-27-2014 at 12:34 AM.
ICPUG has a response to my post #8 at:
http://knoppix.net/forum/showthread.php?31081-Poor-Man-s-Install-of-Latest-Knoppix
--utu
I've described this in the Wiki => Poor man's install and you'll find there how to boot this install with Grub legacy or Grub2.I would expect this process to proceed to put something on the hdd, but that perhaps the boot process would need some re-working, there likely being some differences in booting hdds rather than usbs.
With this installation method you can install Knoppix for example on a NTFS partition with Windows7 on it or on a ext3 partition with Ubuntu on it. Windows7 or Ubuntu (my examples) will not be damaged by this "Poor man's install" and when your are booting this install for the first time, you'll be asked to create persistent memory (overlay file - not overlay partition).
Vintage Apple Disk II Analog Card 820-0007
$50.00
Vintage Commodore 64 English I, II, III Public Domain Series W/ Instruction
$29.99
Dell Inspiron 600M vintage laptop computer, 40GB HD, Windows 98 SE
$110.00
Vintage Original Apple AirPort Card 630-2883, Model PC24-H - Tested
$19.00
Vintage Sony VGN-SZ240P 13” Intel T2400 1gb 100GB HD Nvidia Windows 10 works
$49.90
Vintage Intel Pentium Pro 200 MHz 256K KB80521EX200 SL22V Socket 8 Collectible
$30.00
IBM ThinkPad X60 Vintage Laptop Intel Centrino 1.5GB RAM+500GB HDD - WORKS
$80.00
IBM Thinkpad T41 vintage laptop 14 inch Screen, 40GB HD, Windows 98 SE
$120.00
VINTAGE 1992 NEWPORT SYSTEMS 700-0002-001 REV E GREAT CONDITION
$99.99
Vintage Comfort Keyboard Systems Ergomagic Mechanical AT/PS2 Keyboard
$134.99