Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: I think I've broken it

  1. #1
    Junior Member
    Join Date
    May 2014
    Posts
    6

    I think I've broken it

    I have installed Knoppix 7.2 to the HDD of an old laptop (Pentium 2 mobile CPU @ 300Mhz and 200 Mb ram). All works pretty well considering the low spec. I installed a few things fine then I did a mark all upgrades in synaptic. The upgrade failed and now it's broken and anything I try to install fails. I have trawled the forums and saw reference that you should not try to upgrade the installed packages. What have I done, why shouldn't I have done it and can I fix this. My Linux knowledge is beginner. Many thanks.

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    .. why shouldn't I have done it and can I fix this.
    No, you cannot repair the broken installation.
    HD install warning

  3. #3
    Junior Member
    Join Date
    May 2014
    Posts
    6
    I should have read that in the first place. My laptop cannot boot from USB and running from cd is too slow. Knoppix runs really well from the hdd install on this slow system so it is a shame it is not 'suitable'. It runs as well as any distro I have tried which is limited by the limited hardware. Thanks for the answer.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    .. so it is a shame it is not 'suitable'.
    Knoppix is a Live Linux CD ..

  5. #5
    Junior Member
    Join Date
    May 2014
    Posts
    6
    Why does it have a hdd installer.

  6. #6
    Junior Member
    Join Date
    May 2014
    Posts
    6
    I meant that my laptop is not suitable for running knoppix as I cannot boot from USB. But it does beg the question why is there a hdd installer.

  7. #7
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    You can do the HW install, but it remains a Live system with all the limitations I've told you. HW install isn't a conjuring trick to change the action of Knoppix.

  8. #8
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    A related question:

    .
    Greetings terrybull & Werner.

    I have a similar situation where I'd like to do something like a
    "poor-man's hdd install" of Knoppix. That is use a Knoppix LiveCD
    to perform a Knoppix "Install to FlashDisk" but issuing the hdd descriptor
    instead of a usb descriptor when asked.

    I would expect this process to proceed to put something on the hdd,
    but that perhaps the boot process would need some re-working, there
    likely being some differences in booting hdds rather than usbs.

    Somehow I expect the persistence process to be workable as well,
    since that was part of the essence of the original "poor-man's install"

    I was planning to use the following material as a guide to this
    endeavor. Have I got something all wrong here or is this a viable
    approach? Thanks in advance.

    Read "Poor-Man's Install" at:
    http://smtp.knoppix.net/wiki/Categor...e_Installation

    See also this ref and its variations:
    http://g33kgrrl.wordpress.com/2009/0...livepartition/
    Last edited by utu; 05-27-2014 at 12:34 AM.

  9. #9
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    See response on an adjacent thread by ICPUG


  10. #10
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    I would expect this process to proceed to put something on the hdd, but that perhaps the boot process would need some re-working, there likely being some differences in booting hdds rather than usbs.
    I've described this in the Wiki => Poor man's install and you'll find there how to boot this install with Grub legacy or Grub2.

    With this installation method you can install Knoppix for example on a NTFS partition with Windows7 on it or on a ext3 partition with Ubuntu on it. Windows7 or Ubuntu (my examples) will not be damaged by this "Poor man's install" and when your are booting this install for the first time, you'll be asked to create persistent memory (overlay file - not overlay partition).

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL Poweredge E10S R210 4GB RAM 2.4GHZ 1U Server MW3H2 picture

DELL Poweredge E10S R210 4GB RAM 2.4GHZ 1U Server MW3H2

$39.00



Dell PowerEdge R510 Server  2X 2.80GHz 6 Cores  32 GB  36TB Storage Linux picture

Dell PowerEdge R510 Server 2X 2.80GHz 6 Cores 32 GB 36TB Storage Linux

$265.00



Dell PowerEdge T610 Tower Server - CTO Wholesale Custom to Order picture

Dell PowerEdge T610 Tower Server - CTO Wholesale Custom to Order

$180.19



Dell PowerEdge R620 Server | 2x E5-2670 16 Cores | 96GB | H710 | 2x 600GB 10K  picture

Dell PowerEdge R620 Server | 2x E5-2670 16 Cores | 96GB | H710 | 2x 600GB 10K

$372.80



Dell PowerEdge R720xd Server 2x E5-2680 2.7Ghz 16-Cores  128gb  H710  12x Trays picture

Dell PowerEdge R720xd Server 2x E5-2680 2.7Ghz 16-Cores 128gb H710 12x Trays

$364.99



Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY picture

Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY

$159.99



Dell Poweredge R220 Server Xeon E3-1271 v3 3.6ghz Quad Core / 16gb / 1x Tray picture

Dell Poweredge R220 Server Xeon E3-1271 v3 3.6ghz Quad Core / 16gb / 1x Tray

$156.99



Dell PowerEdge R620 1U Server - 2X E5-2630 Hex Core/64GB/H310 RAID/2X 300GB SAS picture

Dell PowerEdge R620 1U Server - 2X E5-2630 Hex Core/64GB/H310 RAID/2X 300GB SAS

$174.99



Dell PowerEdge R630 Server / 2x E5-2695 V3 = 28 Cores / 96GB / H330 / 2x 1TB SAS picture

Dell PowerEdge R630 Server / 2x E5-2695 V3 = 28 Cores / 96GB / H330 / 2x 1TB SAS

$1044.00



Dell PowerEdge R730XD Server 24BAY 2.5

Dell PowerEdge R730XD Server 24BAY 2.5" H730P Controller Dual 750W - BareBone

$449.99