No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I have installed Knoppix 7.2 to the HDD of an old laptop (Pentium 2 mobile CPU @ 300Mhz and 200 Mb ram). All works pretty well considering the low spec. I installed a few things fine then I did a mark all upgrades in synaptic. The upgrade failed and now it's broken and anything I try to install fails. I have trawled the forums and saw reference that you should not try to upgrade the installed packages. What have I done, why shouldn't I have done it and can I fix this. My Linux knowledge is beginner. Many thanks.
No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I should have read that in the first place. My laptop cannot boot from USB and running from cd is too slow. Knoppix runs really well from the hdd install on this slow system so it is a shame it is not 'suitable'. It runs as well as any distro I have tried which is limited by the limited hardware. Thanks for the answer.
Knoppix is a Live Linux CD .... so it is a shame it is not 'suitable'.
Why does it have a hdd installer.
I meant that my laptop is not suitable for running knoppix as I cannot boot from USB. But it does beg the question why is there a hdd installer.
You can do the HW install, but it remains a Live system with all the limitations I've told you. HW install isn't a conjuring trick to change the action of Knoppix.
.
Greetings terrybull & Werner.
I have a similar situation where I'd like to do something like a
"poor-man's hdd install" of Knoppix. That is use a Knoppix LiveCD
to perform a Knoppix "Install to FlashDisk" but issuing the hdd descriptor
instead of a usb descriptor when asked.
I would expect this process to proceed to put something on the hdd,
but that perhaps the boot process would need some re-working, there
likely being some differences in booting hdds rather than usbs.
Somehow I expect the persistence process to be workable as well,
since that was part of the essence of the original "poor-man's install"
I was planning to use the following material as a guide to this
endeavor. Have I got something all wrong here or is this a viable
approach? Thanks in advance.
Read "Poor-Man's Install" at:
http://smtp.knoppix.net/wiki/Categor...e_Installation
See also this ref and its variations:
http://g33kgrrl.wordpress.com/2009/0...livepartition/
Last edited by utu; 05-27-2014 at 12:34 AM.
ICPUG has a response to my post #8 at:
http://knoppix.net/forum/showthread.php?31081-Poor-Man-s-Install-of-Latest-Knoppix
--utu
I've described this in the Wiki => Poor man's install and you'll find there how to boot this install with Grub legacy or Grub2.I would expect this process to proceed to put something on the hdd, but that perhaps the boot process would need some re-working, there likely being some differences in booting hdds rather than usbs.
With this installation method you can install Knoppix for example on a NTFS partition with Windows7 on it or on a ext3 partition with Ubuntu on it. Windows7 or Ubuntu (my examples) will not be damaged by this "Poor man's install" and when your are booting this install for the first time, you'll be asked to create persistent memory (overlay file - not overlay partition).
Western Digital 1TB Caviar WD1002FBYS Enterprise SATA Hard Disk Drives
$24.99
832514-B21 HPE 1TB SAS 12Gb/s 7.2K SFF SC HDD 832984-001
$129.00
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
### MZ-7KE1T0 Samsung 850 Pro Series 1TB 2.5 inch SATA3 SSD ###
$105.00
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
Samsung - Geek Squad Certified Refurbished 870 EVO 1TB SATA Solid State Drive
$67.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Apple 1TB Solid State Drive for Apple MacBook Pro
$80.00
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$80.39