Results 1 to 2 of 2

Thread: 7.2 Flash Boot mount failure

  1. #1

    7.2 Flash Boot mount failure

    Hi! So, besides rain for planting rice, I need to get Knoppix7.2 to boot from a flash drive. I downloaded the DVD, checked md5 and copied the iso image to a flash drive using an overlay option. Knoppix boots fine on my Toshiba laptop but hiccups on my PC, and, of course, I need it to work on my PC.

    I boot using KNOPPIX64 or DEBUG64
    Here's the boot error message I'm getting:
    Compressed KNOPPIX image is broken: /mnt-system/KNOPPIX/KNOPPIX on /dev/sdc1 on /mnt-system type vfat (rw,relatime,fmask=0000,dmask=0000,allowutime=0022 ,codepage=850,iocharset=utf8,shortname=winnt,error s=remount-ro)
    [ 15.639342] cloop: out of kernel mem for offsets
    Could not mount /mnt-system/KNOPPIX/KNOPPIX. Starting debugging Shell . . .
    sh: can't access tty: job control turned off

    Here are my computer spec's
    Motherboard: ASUS P8H61-M LE
    CPU: Intel Core i5 2450 @ 3.10 GHz
    On-Board Graphics: Intel HD 2500Graphics, 2 ports
    Grahics Card: Power Color Radeon HD6670, 2 ports *****
    Hard Drive for OS: 120GB Solid State SanDisk Extreme SSD SSDX120GG25
    Hard Drive for work files: Western Digital 120GB
    RAM: 8GB, 2 X 4GB Kingston DDR3 @ 1333 Mhz
    Power Supply: 530 Watt Modular, Raidmaxx RX530ss
    Optical Disk Drive: DVD/CD R-RW, LG MODISK SATA
    Monitors:
    Samsung 223BW 21.6" LCD / TFT active matrix
    Samsung Syncmaster 793MG 17in. Flat panel SVGA CRT Monitor
    LG E2342T 23" LCD/LED flat screen
    Dell M783S 17in. Flat panel SVGA CRT Monitor

    Radeon Display driver: 8.982.0.0000

    /# fdisk -l results:
    /dev/sda1 data storage drive 120 GB
    /dev/sdb1 SSD reserve partition for booting 100MB
    /dev/sdb2 ssd drive c: 120GB - 100MB
    /dev/sdc1 flash drive KNOPPIX shows as boot device 8GB FAT32

    Thanks for the help.
    Geoffrey Wheeler, Ban Thin, Tambon Ban That, Phen District, Udon Thani Thailand

  2. #2
    I updated the BIOS (to 4601 x64 9/8/2013), set it to Enable Multiple Monitors (I've got 4) and set Primary Graphics = PCIe (Radeon HD6670) and used the boot menu [F8]. There are 2 options for booting from the USB: UEFI and non-UEFI. UEFI errors, non-UEFI boots! I'm happy about that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF picture

Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF

$335.99



Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,  picture

Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,

$54.00



Cisco GLC-GE-100FX 100BASE-FX SGMII SFP, 1310nm, 2km, LC, MMF picture

Cisco GLC-GE-100FX 100BASE-FX SGMII SFP, 1310nm, 2km, LC, MMF

$83.99



Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile picture

Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile

$19.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00



Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC picture

Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC

$13.89



Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER picture

Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER

$11.90



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.80