Hi folks
Summary:
1. I'd like to obtain and install the Broadcom proprietary wireless driver called "wl", using the instructions given at
https://wiki.debian.org/wl
2. In particular, I was going to follow the instructions under section
"1.1 Installation - Debian 7 Wheezy" on that webpage (as if I know what I'm talking about). Or should I follow the "Squeeze" instructions?
3. Could you possibly have a look at the brief instructions that it gives, and
tell me if it should work? More importantly, is it SAFE to follow those
instuctions? Thanks.
4. I've got Knoppix live distro installed on hard disc, distro 7.0.2, kernel
release 3.3.7.
Full Details:
5. A while ago you kindly showed me how to install "wl" on another laptop, and it
worked.
That thread is
http://knoppix.net/forum/showthread....=broadcom+wifi
I think I followed klaus2008's kind instructions at posts #4 and #24.
6. But I'm interested if the method at https://wiki.debian.org/wl works.
I'm now using a different laptop to the one at 5. (similar model), but it's got
the SAME Knoppix system on it. Unfortunately, I have very limited understanding
of what some of the commands are doing at https://wiki.debian.org/wl. And I
DON'T WANT TO DO SOMETHING THAT'S DETRIMENTAL TO MY LINUX SYSTEM - you know, do
something that will mess the system up, because it works reasonably well at the
moment.
7. One of the above steps is
# apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
On my system, "uname -r" displays "3.3.7". Because I've actually got KNOPPIX (a
form of Debian), is the number 3.3.7 a legitimate Debian release number. And
therefore will using 3.3.7 in the above command get me the correct "wl" driver
version. (I understand that "wl" and "broadcom sta" are one and the same thing.)
8. If the method doesn't work, can I put things back to where they were before I
started. You see I don't like to add things to my system that just complicate it
and bulk it out, especially when I don't actually know how it's changed the
system.
Many thanks, John.
Last edited by Werner P. Schulz; 06-01-2014 at 06:17 PM. Reason: As desired by poster.
$168.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD
$500.00
SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears
$174.99
HPE ProLiant v2 Ultra Micro Tower Server Pentium Gold G6405 16GB RAM P69102005
$696.73
SuperMicro SuperServer 5038MR-H8TRF Blade w/X10SRD-F Board E5-2630v3 Proc 128GB
$263.96