Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
UCSB-B480-M5, CISCO UCSB-B480-M5 V05 UCS B480 M5 BLADE SERVER W UCSB-MLOM-40G-03
$950.00
Cisco UCSB-B200-M4 Blade Server Chassis 73-15862-06 with back No RAM and CPU
$109.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Lot of 25 Cisco UCS B200 M4 Blade Servers, 2x2680 V3, 40GbE, No Ram No HDD
$749.99
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99