Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS
$338.99
Dell PowerEdge T130 Intel Xeon E3-1220 v5 8GB RAM 1TB HDD VGA USB Win 10 Server
$309.99
Dell PowerEdge R630 Server | 2x E5-2680v3 24cores 2.4GHz | 128GB | H730 | 2x750W
$530.00
HP Proliant DL360p G8 Server 2x E5-2690 2.9GHz =16 Cores | 128GB | 2x trays
$275.20
HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RAIL NO HDD
$142.00
HPE ProLiant EC200a Mini Server, Xeon D1518 2.2GHz CPU
$159.00
Dell PowerEdge R620 Server 2x E5-2650L V2 2.6GHz =20 Cores | 32GB | 2x 1TB SATA
$185.60
HP Proliant DL360p G8 Server | 2x E5-2680 2.7GHz =16 Cores | 96GB | 2x 300GB SAS
$179.99
Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS
$324.99
Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T
$369.00