Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SuperMicro RACK SERVER 502-2 5015A-H
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00