Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
DATTO-1000 Micro Server 8GB RAM
$110.00
Supermicro 847BE1C-R1K28LPB 4U 36-Bay Server Chassis 12Gbs SAS3-846EL1 w/ Rail
$799.00
HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs
$575.00
HPE ProLiant MicroServer Gen10 AMD Opteron X3216 8GB RAM No HDDs
$400.00
HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅
$99.99
DATTO-1000 Micro Server 8GB RAM 500GB HHD
$175.00
HPE ProLiant MicroServer Gen10 Plus Ultra Micro Tower Server - 1 x Intel Pentium
$861.67
HPE ProLiant MicroServer Gen10 Plus Ultra Micro Tower Server
$800.00
Super Micro 512-5 Intel Xeon E5620 2.4 GHz Server x8dtl-3 w/6 GB/CDRW & DVDROM
$184.99
SUPER MICROS SERVER MOTHERBOARD X10DRS-4U REV: 1.03 AOM-S3008-L8-SB CONTROLLER
$249.00