Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's
$299.00
HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED
$179.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD
$750.00
ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM
$170.00
HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs
$399.00
HP ProLiant N36L Micro Server 633724-001 AMD Athlon II Neo N36L - No HDDs
$82.07
HP ProLiant Microserver Micro Server HSTNS-5151 untested
$75.00
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001
$849.99