Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
When I launch wireshark(from k-menu..run, or from the command line) it loads but doesn't list interfaces unless I do sudo wireshark or I suppose if I do su then wireshark. That's fine.
But sudo wireshark or su<ENTER>wireshark<ENTER> isn't working.
It worked yesterday but now when I try, I get this error
knoppix@Microknoppix:~$ su root
root@Microknoppix:/home/knoppix# wireshark
No protocol specified
(wireshark:4986): Gtk-WARNING **: cannot open display: :0
root@Microknoppix:/home/knoppix# su knoppix
knoppix@Microknoppix:~$ sudo wireshark
No protocol specified
(wireshark:503: Gtk-WARNING **: cannot open display: :0
knoppix@Microknoppix:~$
Do not run wireshark as user "root"!
Read some documentations about wireshark. Your problem isn't a Knoppix problem.
Thanks. I got it to work since some days back. For the record it was most likely this solution that I used
http://ask.wireshark.org/questions/7...erfaces-listed
$ sudo apt-get install wireshark
$ sudo dpkg-reconfigure wireshark-common
$ sudo usermod -a -G wireshark $USER
$ sudo reboot
pfSense Firewall Router (6) 1Gb Intel Ethernet Ports AES-NI CPU 4GB RAM 80GB SSD
$79.95
OPNsense Network Firewall Router Security Appliance
$79.95
SUPERMICRO sys-5015a ehf ATOM D510 4GB MEMORY 128GB SSD FIREWALL APPLIANCE
$139.00
Palo Alto Networks PA200 Enterprise Firewall Security Appliance PA-200
$34.00
Palo Alto PA-220 Next-Gen Firewall
$150.00
Fortinet Fortigate FG-60D Firewall Network Security Appliance v5.4.7
$29.00
NEW NETGATE SG-1000 pfSense FIREWALL SECURITY GATEWAY with AC & MICRO USB
$99.99
pfsense firewall I225-V 2.5 G Quad Core AWS-NI Gateway
$110.00
CISCO ASA5506-X Firewall Unlimited Host FirePOWER ASA5506-K9 Not Affected Serial
$149.99
SonicWall TZ500 Firewall - Lightly Used
$249.00