Please try "Cannot boot".
Be aware, Knoppix is a modern Linux and may not run on very old computers, especially not on computers from the last century.
I booted an old pc with knoppix 7.2. The pc reboots okay but knoppix will not start. I ran the debug cheat code but the only information I got was knoppix found at /dev/sr0, past mounting /mnt-system, sh: cant access tty; job control turned off. If I try running knoppix manually, it tells me knoppix not found. If I change to the KNOPPIX directory and run the command, I get the same error. I tried the cd in another laptop and was able to run knoppix successfully. Does debug log the startup information to a file I can read? What am I doing wrong?
Please try "Cannot boot".
Be aware, Knoppix is a modern Linux and may not run on very old computers, especially not on computers from the last century.
I tried
- boot: knoppix vga=0
- boot: knoppix acpi=off pnpbios=off noapic noapm
- and got boot:knoppix not found.
- The motherboard is an ECS k7vza with 768 mg of memory, the cpu is an athlon 1.1gh.
You have to omit 'boot:'
I tried the options without entering boot, no change.
If your system has got a free USB port you could use a second system to create a flash install of Knoppix on a USB stick.
You will also need a suitable bootonly Knoppix CD. After all preparations have been made you can plug in the USB stick and boot from the bootonly CD.
Please try starting Knoppix with the cheatcode
boot: knoppix vga=0 debug -b 3
from "Cannot boot"
Each time you can see "sh: can't access tty; job control turned off" proceed with [Control D]. If all went well, you'll get the next of the following messages:
Now you will see a long list of INIT processCode:Past mounting /mnt-system Past mounting /KNOPPIX Past mounting /KNOPPIX-DATA Past mounting /UNIONFS Past symlinks to /UNIONFS BusyBox ... built-in shell (ash) Final DEBUG Shell before starting init INIT: version ... booting Give root password for maintenance (or type Control-D to continue)
(Scroll up and down the output list of INIT with [Shift-PageUp] and [Shift PageDown])
When you get the message:
INIT: Entering runlevel: 3
root@Microknoppix:/#
type: init 5
and the boot process will start the graphical desktop.
I rebooted with the knoppix vga=0 debug -b 3 command, got:
Compressed KNOPPIX image is broken: /mnt-system/KNOPPIX/KNOPPIX on /dev/sr0 on /mnt-system type iso9660 (ro,reltime)
[ 6.566185] cloop: Bad file, read() of first 4096 bytes returned -5.
could not mount /mnt-system/KNOPPIX/KNOPPIX. Starting debug shell...
/sh: can't access tty: job control turned off
/# past mounting /UNIONFS.
/sh: can't access tty: job control turned off
/# Past symslinks to /UNIONFS
/init: line 973: /bin/busybox: not found
/# init: line 973: reboot: not found
I am sure the disk works because I was able to boot another computer with it.
I would check the "md5sum" of the download and the integrity of the burned DVD with the cheatcodeIf there are no errors, use another DVD drive within your old computer. Perhaps the drive causes the problems.Code:knoppix testcd
Watchguard XCS 570 Firewall SuperMicro 1U Server Intel 4GB VPN Router LINUX 🍁
$146.29
KRAMBU 8 GPU 4U Barebone Server
$1499.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$674.96
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$449.96
Custom Server PFSENSE 15" Depth Supermicro X11SSH-F E3-1240 V5 32GB RAM X540-T2
$430.00
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 40G Elastic Storage Server 5148-22L
$599.95
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux
$836.80
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99