-
Thanks Klaus,
So, evdev is a catch all that won't work for authenticating an encrypted partition? I've rerun the OS to the USB stick w/o the encryption and now there's no requirement for the other KB. Just the same, I running the above to clear up any problem. We'll check back.
Thanks again,
Gary
-
OK Klaus,
[ 21.717] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 21.717] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 21.717] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 21.717] (**) Logitech USB Receiver: always reports core events
[ 21.717] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 21.717] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc505
[ 21.717] (--) evdev: Logitech USB Receiver: Found keys
[ 21.717] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 21.717] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 21.718] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 21.718] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 21.718] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 21.718] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 21.718] (**) Logitech USB Receiver: always reports core events
[ 21.718] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 21.718] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc505
[ 21.718] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 21.718] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 21.718] (--) evdev: Logitech USB Receiver: Found relative axes
[ 21.718] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 21.718] (--) evdev: Logitech USB Receiver: Found keys
[ 21.718] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 21.718] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 21.718] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 21.718] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 21.718] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.718] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 21.718] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 21.719] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 21.719] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 21.719] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 21.719] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 21.719] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 21.720] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event4)
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[ 21.720] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[ 21.720] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event4"
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[ 21.720] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[ 21.720] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[ 21.720] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.720] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 11)
[ 21.720] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[ 21.720] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[ 21.720] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
Thanks,
Gary
This is the new output, piping less thru grep on Logitech:
-
And then there's the new lsmod:
Module Size Used by
parport_pc 23972 0
ppdev 4167 0
lp 6185 0
parport 21928 3 lp,ppdev,parport_pc
ipv6 212138 16
i915 430125 3
drm_kms_helper 20665 1 i915
bnep 7279 2
rfcomm 23249 10
ath3k 4538 0
btusb 8785 0
bluetooth 143972 25 bnep,ath3k,btusb,rfcomm
coretemp 4518 0
kvm_intel 109899 0
kvm 275162 1 kvm_intel
wmi 6035 0
crc32_pclmul 2177 0
serio_raw 3206 0
arc4 1463 2
ath9k 63510 0
ath9k_common 1456 1 ath9k
ath9k_hw 330565 2 ath9k_common,ath9k
ath 10993 3 ath9k_common,ath9k,ath9k_hw
mac80211 347664 1 ath9k
cfg80211 319430 3 ath,ath9k,mac80211
snd_hda_codec_hdmi 22332 1
e1000e 121204 0
snd_hda_codec_realtek 22017 1
joydev 6659 0
snd_hda_intel 24570 4
snd_hda_codec 90020 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_i ntel
lpc_ich 10929 0
ptp 5855 1 e1000e
pps_core 4891 1 ptp
i2c_i801 11125 0
hid_logitech_dj 7966 0
I'm not sure if the code changes much. As an IT student, I'd be interested in your opinions. I mean I can tell that the wired Kb is unplugged and Santana's playing on the disc drive. Well, not by name.
The new directory is there and the renamed file. Copied and pasted to a root terminal.
Still, wonder why the encrpted persistent partition made any difference in the Kb?
Gotta go study Windows (barf), A+ scheduled - 15July, 801 @9:30, 802 @ 1300.
I aced a college level UNIX Shell scripting course, way back when. Ran SunOs and early Solaris for years. It's coming back to me slowly.
Thanks for all your help and tuition,
Gary
-
Senior Member
registered user
If you do not use an encrypted overlay you do not need the modified minirt.gz.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730 8 SFF 2x E5-2660 v4 28 Cores 128/256GB 0/3x 900GB 6Gbps H730
$349.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00