The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
I have a two-disk RAID1 system that had some problems. I have disabled RAID, removed one of the drives, cleaned it up, and placed it back into the system. RAID is still disabled, but this drive boots fine.
My original intent is to use Clonezilla to clone from the cleaned up drive to the suspect drive. Problem is, I need to know how my SATA0,SATA1 slots are assigned to sda, sdb when booted under Clonezilla, otherwise I might copy the dirty drive to the clean drive. From what I have read, it isn't automatically going to assign SATA0=sda,SATA1=sdb.
If I could browse the windows root folder of each drive, I could easily tell which was which. I can boot with Knoppix, and it does show the drives, but I am unable to mount the ntfs partitions in order to take a look at the files (fat32 mounts ok). I tried from both the desktop, and the console using ntfs-3d. I found the same problem with gparted live.
It seems like I was able to do this before. What am I missing?
The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED
$550.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE Proliant Microserver Gen10 X3421 Perf AMS, P03698-S01, 16GB Ram
$299.00
Supermicro CSE-512 1U Sever Intel G550 2.60GHz 4GB w/ X9SCM Motherboard
$99.98
HP/HPE ProLiant AMD Opteron X3216 APU 16 GB RAM MicroServer Gen 10 NO DRIVES
$299.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00